Select your vehicle
-13%

Pro Comp PRO-M Monotube Front Shock Absorber – PR2090

Pro Comp Suspension

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Pro Comp PRO-M front monotube shock, part PR2090, sold individually
  • Designed for 3.5 to 4 inches of lift
  • Extended 24.7 in, collapsed 15.6 in
  • Fits the 1984 to 2001 Jeep Cherokee XJ

Description

Overview

The Pro Comp Suspension PR2090 is a PRO-M front monotube shock for the 1984 to 2001 Jeep Cherokee XJ with 3.5 to 4 inches of lift. It has an extended length of 24.7 inches and a collapsed length of 15.6 inches, and it is sold individually.

Pro Comp uses a nitrogen gas charge with a floating piston in this shock, which separates the oil from the gas. Multi-stage disc pack valving is set for the application, and the shock comes with a polyurethane boot.

Key features

  • Front monotube design for 3.5 to 4 inches of lift
  • Extended length 24.7 inches, collapsed length 15.6 inches
  • Nitrogen gas charged with floating piston
  • Multi-stage disc pack valving, vehicle specific
  • 14 mm chrome hardened shaft
  • Polyurethane shock boot included

Working on an XJ front end

The Cherokee XJ front suspension is simple, but its mounts and springs age with the vehicle. Before fitting a front damper, look at the upper and lower mount bushings for cracking or compression, since a misaligned mount can make a new shock wear quickly. A shock sized for three and a half to four inches of lift is usually chosen for a truck that has already been raised, so confirm the current height first.

Front dampers on an XJ take most of the load from rock and washboard roads. Pair a new shock with fresh bushings and a check of the steering linkage and brake lines, which sit near the front axle. Keep the boot clean and check it after the first trip, since debris that gets under the boot can scratch the shaft and shorten the shock’s life.

  • Check upper and lower bushings for cracks
  • Look over the steering linkage after installation
  • Keep the shaft clean of mud and grit

Specifications

Brand Pro Comp Suspension
Part number EXPPR2090
Shock series PRO-M
Position Front
Extended length 24.7 in
Collapsed length 15.6 in
Lift 3.5 to 4 in
Shaft 14 mm chrome hardened
Finish Silver powder coat

Vehicle fitment

It fits the 1984 to 2001 Jeep Cherokee (XJ), in Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE and Sport trims.

It is designed for the Cherokee XJ. Confirm fit for your vehicle’s year, model and trim before ordering, including Grand Cherokee or KK models.

Installation notes

Compare the 24.7 inch extended and 15.6 inch collapsed lengths with the front shock being replaced before the XJ is lifted or lowered. The 3.5 to 4 inch lift range is the one this shock is designed for, so check the height first. Inspect the factory mounts on the XJ for wear, and confirm the shock moves freely through the full range of travel once installed.

Check the front mounts on the Cherokee XJ for wear before installation, since older mounts can be out of square. Confirm the shock clears the front spring at full compression and inspect the polyurethane boot after the first trip.

Check that the front shock clears the steering linkage and the brake lines at full lock, and confirm the boot is seated fully on the shaft.

What’s included

One PRO-M front monotube shock with polyurethane boot under part number EXPPR2090.

Fitment

VehicleYearsTrims
Jeep Cherokee (XJ)1984–2001Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE, Sport

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the PR2090 fit a 1995 Jeep Cherokee XJ?

Yes. It fits the 1984 to 2001 Cherokee XJ, which includes 1995 models in Base, Briarwood, Classic, Country, Laredo, Limited and Sport trims. Confirm fit for your vehicle's year, model and trim before ordering.

How much lift is the PR2090 designed for?

It is designed for 3.5 to 4 inches of lift. The shock has a 24.7 inch extended length and a 15.6 inch collapsed length, so check the lift height before fitting.

Does it fit a Grand Cherokee?

No. It is designed for the Cherokee XJ, so the Grand Cherokee WJ and ZJ need a shock built for their own mounts and lengths. Confirm fit for your vehicle's year, model and trim before ordering.

Can a front shock be replaced without replacing the mounts?

Yes, if the mounts are sound. Check the upper and lower bushings for cracks, compression or oil before reusing them. Worn mounts can misalign a new shock and wear it faster, so replacing them at the same time is the safer choice on an XJ.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon