Overview
The Pro Comp Suspension 51038BX-1 is a 2.5-inch PRO-VST coilover front shock for the Chevrolet Silverado 1500 from 2007 to 2021. It is part of Pro Comp’s PRO-VST line, built for off-road use with vehicle specific tuning for ride quality on road.
The shock body is hard-anodized with a thick wall and an impact forged design. The 17-4 PH stainless steel shaft is chrome plated, which gives corrosion and abrasion resistance.
Key features
- Thick wall, hard-anodized impact forged body
- 17-4 PH stainless steel shaft, chrome plated
- Vehicle specific tuning for on-road ride quality and off-road performance
- Gas charged coilover design
- 2.5-inch body diameter
Coilover setup and upkeep
A coilover ties the spring to the damper body, so the spring seat position is the main way to set ride height. Turning the preload changes height without swapping parts, but the installed length should stay within the range the shock is designed to cover. Keep the spring seat clean and seated square to avoid uneven load on the damper.
Coilover shocks are often serviced together with other front parts, such as control arm bushings, ball joints and tie rod ends, when a truck has high mileage. Inspect the bushings and the upper mount for cracking, and look for oil streaks on the body or a shaft that feels rough when pushed by hand. Those signs suggest the damper is wearing and the shock should be checked.
- Check the upper mount for cracks
- Look for an oil film on the shock body
- Inspect the bump stop for wear
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 51038BX-1 |
| Shock series | PRO-VST |
| Position | Front |
| Shock type | Coilover |
| Body diameter | 2.5 in |
| Shaft | 17-4 PH stainless steel, chrome plated |
| Charge | Gas charged |
Vehicle fitment
The fit covers the 2007 to 2021 Chevrolet Silverado 1500, plus the 2007 Silverado 1500 Classic, the 2007 Silverado 1500 HD Classic and the 2019 Silverado 1500 LD.
Models and trims outside the 1500 range above, including the 2500 HD and GMC trucks, should be checked against your vehicle before ordering.
Installation notes
A coilover combines the damper and spring in one unit, so installed height and the spring seat set the ride height. Before ordering, confirm the front position fits your Silverado and that any lift stays within the range this shock covers. The PRO-VST is tuned for its vehicle, which is why its fit is narrow.
Check the shock’s mounting bolts and bushings for wear before assembly, and confirm the shock moves smoothly through its full travel with the wheel off the ground. Look for oil on the body after the first drive.
What’s included
One front coilover shock under part number 51038BX-1.
















