Overview
The Pro Comp Suspension 924503 is an ES9000 series twin tube shock for the 1974 to 1975 Dodge Ramcharger, the 2006 to 2010 Hummer H3 and the 1974 Plymouth Trailduster. It is a rear shock with factory upper and lower mounts and is sold as each.
The shock uses 10 stage velocity sensitive valving, which Pro Comp says gives a smooth, comfortable ride and better handling off road. A 1 3/8-inch nylon banded piston head and double welded shock mounts are used for strength and long life.
Key features
- Twin tube design
- 10 stage velocity sensitive valving
- 1 3/8-inch nylon banded full displacement piston head
- Double welded shock mounts
- Factory upper and lower mounts
- White finish
Rear shock basics
A rear shock controls body motion and wheel control as the leaf springs or coils compress and rebound. On an older truck, worn shocks show up as a bouncy ride, nose dive under braking or cupping on the tires. Valving sets how quickly the shock resists movement, so a shock with a stiffer compression stage feels firmer over bumps. Keep the old shock until the new one is confirmed to fit.
When replacing a rear shock, match the mounting style and length to the original, and replace them in pairs so both sides damp the same way. Inspect the boot and the piston rod for oil film, dents or bent tubes, and check the mounts for cracked bushings. Clean the mounts before installing, and use the same boot style if the old one was in good condition.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | EXP924503 |
| Shock series | ES9000 |
| Shock type | Twin tube |
| Position | Rear |
| Piston head | 1 3/8 in, nylon banded |
| Valving | 10 stage velocity sensitive |
| Upper and lower mount | Factory |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot | Not included |
| Length | Vehicle specific |
Vehicle fitment
It fits the 1974 to 1975 Dodge Ramcharger (Base and SE), the 2006 to 2010 Hummer H3 (Alpha, Base, Championship Series and X) and the 1974 Plymouth Trailduster (Base).
It does not fit other Dodge, Hummer or Plymouth models. Check the vehicle’s year, model and trim against this fit before ordering.
Installation notes
Lengths vary by vehicle. Check the collapsed and extended lengths against the original shock before installing.
What’s included
One rear shock absorber under part number 924503.
Not included: the shock boot.
















