Select your vehicle
-13%

Pro Comp Pro Runner Monotube Shock ABSorber

Pro Comp Suspension

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rear PRO-M monotube shock for 0 to 2 inches of lift
  • Extended 29.8 inches, collapsed 18.5 inches
  • Nitrogen gas charged with a floating piston
  • Vehicle-specific valving and a multi-stage disc pack
  • Sold individually, polyurethane boot included

Description

Overview

The Pro Comp PRO-M monotube shock, part number EXPPR2021, is a rear shock with a 29.8-inch extended length and an 18.5-inch collapsed length. It is sold individually.

It is for models with 0 to 2 inches of lift. It fits the 1999–2016 Ford F-250 and F-350 Super Duty and the 2007–2021 Toyota Tundra.

The monotube design uses an internal floating piston to separate the oil from the nitrogen gas charge. This design is intended to eliminate cavitation, which would otherwise reduce performance during compression and rebound.

The 2.0 shock body has increased oil capacity, which helps the shock shed heat during off-road use, and a new wiper seal design is meant to prevent leaks. Each shock has a 14mm chrome hardened shaft and multi-stage valving tuned for each application.

Built for off-road use, the PRO-M also rides smoothly on the road.

Key features

  • Nitrogen gas charge with a floating piston
  • Vehicle-specific valving with a multi-stage disc pack
  • 2.0 shock body with increased oil capacity
  • 14mm chrome hardened shaft
  • Wiper seal design
  • Silver powder coat finish
  • Polyurethane shock boot included

Choosing and maintaining rear shocks

A rear shock controls how the axle moves over bumps and how quickly the body settles afterward. On a truck that carries loads or tows, the shock works harder, so its damping has a direct effect on control and tire contact. Off-road, the same shock absorbs repeated impacts from ruts and rocks, which is why heat management matters on long runs.

Before you buy, consider how the truck is used most. A shock tuned for daily driving may feel firm on rough trails, while one built for trail use can feel soft on pavement. Match the shock to your typical loads and terrain, and confirm fit for your vehicle’s year, model and trim.

Shocks often wear out alongside bushings and mounting hardware. Inspect the eyelets, bolts and boots at each service and after hard trail use.

  • Check for oil seepage around the shaft seal
  • Look for dents or bends in the shock body
  • Replace worn bushings when replacing the shock

Specifications

Brand Pro Comp Suspension
Part number EXPPR2021
Shock series PRO-M
Position Rear
Shock type Monotube
Extended length 29.8 inches
Collapsed length 18.5 inches
Charge Nitrogen gas
Shock body 2.0
Shaft 14mm chrome hardened
Finish Silver powder coat
Boot Polyurethane, included
Lift range 0 to 2 inches
Sold Individually

Vehicle fitment

It fits the 1999–2016 Ford F-250 Super Duty and F-350 Super Duty, and the 2007–2021 Toyota Tundra.

The list does not include the Ford F-150 or the Toyota Tacoma, or Super Duty models from 2017 onward. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

The mount style is given as eyelet in the specification table and as loop in the feature list, so measure your vehicle’s mounts before ordering. The shock is for 0 to 2 inches of lift, so check your lift height as well.

What’s included

One shock with its polyurethane boot.

Not included: the second shock, since the product is sold individually.

Fitment

VehicleYearsTrims
Ford F-250 Super Duty1999–2016Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, Platinum, XL, XLT
Ford F-350 Super Duty1999–2016Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, Platinum, XL, XLT
Toyota Tundra2007–20211794 Edition, Base, Limited, Nightshade, Platinum, SR, SR5, TRD Pro, Trail

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Is the PRO-M EXPPR2021 a monotube shock?

Yes. It is a gas-charged monotube with a floating piston that separates the oil from the nitrogen charge, which Pro Comp says prevents cavitation.

What is the EXPPR2021 length?

It measures 29.8 inches extended and 18.5 inches collapsed. It is for models with 0 to 2 inches of lift.

Will the EXPPR2021 fit a Toyota Tundra?

It fits the 2007–2021 Toyota Tundra and the 1999–2016 Ford F-250 and F-350 Super Duty. Confirm the model year against those ranges before ordering.

How often should rear shocks be inspected?

Inspect them at every service interval and after hard off-road runs. Look for oil seepage around the wiper seal, dented bodies, bent shafts, and worn or cracked bushings and boots.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon