Overview
The PRO-M monotube rear shock, part number PR2041, has a 26.7 inch extended length and a 17.1 inch collapsed length. It is built for 2007–2018 Jeep Wrangler (JK) models with a 4 inch lift, in both two-door and four-door versions.
An internal floating piston separates the oil from the nitrogen gas charge, which helps prevent cavitation and performance loss during compression and rebound. The 2.0 inch shock body holds more oil, which improves heat dissipation during off-road use.
Multi-stage valving is tuned for each application, and the wiper seal design helps keep the shock from leaking. The PRO-M suits off-road use and still delivers a smooth ride on pavement. Each shock is sold individually, so a pair of rear shocks needs two units. It has a 14mm chrome hardened shaft and comes with a polyurethane shock boot.
Key features
- Monotube body with a 2.0 inch shock body and extra oil capacity
- Internal floating piston separates oil from the nitrogen charge
- Multi-stage valving
- 14mm chrome hardened shaft
- Wiper seal design
- Polyurethane shock boot included
- Silver powder coat finish
Lift height and shock length
Lift height affects shock length more than many buyers expect. A 4 inch lift extends the suspension, so the shock must reach further at full droop without bottoming out at full compression. Measuring the installed length of the old shock with the truck at ride height gives the most reliable comparison.
Jeep JK rear axles see heavy loads and rough trail use, so shock mounts and bushings deserve a look at the same time. Replacing worn bushings alongside the shocks keeps the new unit working as designed. Check the eyelets for cracks and the boot for tears that let grit reach the shaft. After installation, recheck the mounting hardware after the first few trail runs and confirm the rear ride height is even from side to side.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | PR2041 |
| Shock series | PRO-M |
| Shock type | Monotube |
| Location | Rear |
| Extended length | 26.7 in |
| Collapsed length | 17.1 in |
| Shaft | 14mm chrome hardened |
| Charge | Nitrogen gas |
| Finish | Silver powder coat |
| Boot | Polyurethane, included |
Vehicle fitment
It fits 2007–2018 Jeep Wrangler (JK) models, two-door and four-door, in several trim levels, on vehicles with a 4 inch lift.
The JL generation and the 2004–2006 LJ are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm your lift height is 4 inches before installing. Compare the 26.7 inch extended and 17.1 inch collapsed lengths with the current shock before ordering.
What’s included
One rear shock with a polyurethane boot. The shock is sold individually.









