Overview
The Pro Comp Suspension ZXR2040 is a front Pro Runner 2.0 remote reservoir shock for Jeep Wranglers with 3.5 to 4.5 inches of lift. It fits the 2007 to 2018 Wrangler JK, in two-door and four-door models, and the 2018 Wrangler JL Unlimited Moab.
The shock has a clear coated, zinc brushed monotube body and an external reservoir that increases fluid capacity. A floating piston separates gas from fluid, which Pro Comp says reduces cavitation and keeps damping steady in all driving conditions.
Key features
- Front monotube reservoir design for 3.5 to 4.5 inches of lift
- External reservoir for more fluid capacity
- Floating piston separates gas and fluid
- Multi-stage valving tuned for lifted JK ride and handling
- CNC billet aluminum clamp and lower mount
- 18 mm nickel chromium plated shaft
- Rubber bump stop on the shaft bottom
Reservoir mounting and clearance
A remote reservoir shock separates fluid storage from the shock body, which lets the damper keep working with less heat build-up on long climbs. The hose runs from the body to the reservoir, so the route should avoid the steering linkage, exhaust and suspension arms at full travel. Choose a mounting spot that stays clear when the wheels turn and when the suspension compresses.
Because reservoir shocks carry more fluid, they can be heavier than standard units and place more load on the upper mount. Check that the hose is secured with clamps and not rubbing, and inspect the fittings after the first few trail runs. Look for fluid at the reservoir cap, cracks in the hose, or a clicking sound at full compression as signs of wear that need attention.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | EXPZXR2040 |
| Shock series | Pro Runner 2.0 Reservoir |
| Position | Front |
| Shock type | Monotube reservoir |
| Lift | 3.5 to 4.5 in |
| Extended length | 26.46 in |
| Compressed length | 16.67 in |
| Shaft | 18 mm nickel chromium plated |
| Finish | Clear coated zinc brushed |
Vehicle fitment
It fits the 2007 to 2018 Jeep Wrangler (JK), including the 70th and 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X models, and the 2018 Wrangler JL Unlimited Moab.
Confirm fit for your vehicle’s year, model and trim before ordering, especially for TJ, LJ and other JL models.
Installation notes
Compare the 26.46 inch extended and 16.67 inch compressed lengths with the front shock being replaced, since a difference changes the ride height on a lifted JK. The 18 mm nickel chromium plated shaft and the CNC billet aluminum clamp should be checked for fit against the factory mounts. Confirm the external reservoir has a clear mounting position and hose route, and check the rubber bump stop on the shaft bottom so it does not contact the body at full compression.
What’s included
One front remote reservoir shock under part number EXPZXR2040.
















