Overview
The Pro Comp 928001B is a PRO-X twin tube rear shock absorber for the 2007–2013 Chevrolet Avalanche and Silverado 1500 and the 2007–2013 GMC Sierra 1500. It also covers the 2007 Silverado 1500 Classic and 2007 Sierra 1500 Classic. It has a 28.04-inch extended length and a 16.54-inch collapsed length.
The PRO-X is a general-purpose twin tube design for trucks that see mostly paved roads with occasional off-road driving. Its 10-stage velocity sensitive valving is meant to handle a range of road conditions, and the 1-3/8-inch nylon banded piston and 5/8-inch chrome hardened shaft are the core working parts of the shock.
Both mounts are loop eyes, so the shock can be compared with the existing brackets by eye size and length. The 2.0-inch body is finished in black powder coat, and the gas charge is nitrogen stabilized. The optional shock boot is not part of the shock.
Key features
- Twin tube design for general-purpose use
- 10-stage velocity sensitive valving
- 1-3/8-inch nylon banded piston
- 5/8-inch chrome hardened shaft
- Loop eyes at both ends
- Black powder-coated finish
Loop eyes and mounting
Loop eyes pivot on a bushing or bolt at each end, so the shock works through a small arc as the axle moves. When swapping shocks, compare the eye diameter and bushing thickness with the old unit before ordering, since a mismatched bushing can bind or rattle. Worn rubber bushings are a common source of clunking that owners sometimes blame on the shock itself.
Pickups that tow or carry heavy loads often wear shocks sooner, so inspect them every few oil changes. Look for leaks down the body, a loose eye, or a rear end that keeps bobbing after bumps. Replacing rear shocks alongside a worn suspension bushing set helps avoid uneven ride height.
- Check eye bushings for cracks
- Look for oil on the shock body
- Replace in pairs for even damping
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 928001B |
| Shock series | PRO-X |
| Shock type | Twin tube, gas charged (nitrogen stabilized) |
| Position | Rear |
| Extended length | 28.04 in |
| Collapsed length | 16.54 in |
| Body diameter | 2.0 in |
| Piston | 1-3/8 in nylon banded |
| Shaft | 5/8 in chrome hardened |
| Upper mount | Loop |
| Lower mount | Loop |
| Finish | Black powder coat |
| Boot | Optional, not included |
Vehicle fitment
It fits the 2007–2013 Chevrolet Avalanche in the Black Diamond LS, Black Diamond LT, Black Diamond LTZ, LS, LT and LTZ trims, the 2007–2013 Silverado 1500 in the Hybrid, LS, LT, LTZ, WT and XFE trims, and the 2007–2013 GMC Sierra 1500 in the Denali, Hybrid, SL, SLE, SLT, WT and XFE trims. The 2007 Classic versions of the Silverado and Sierra 1500 are also covered.
Silverado and Sierra 1500 models from 2014 onward, and the 2500 and 3500 trucks, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the loop eyes against the existing bracket for your truck, and confirm the 28.04-inch extended length is right for your suspension height. Check clearance at full droop and at full compression before driving.
What’s included
One rear PRO-X shock with loop eyes at both ends. The boot is an optional item.
Not included: the optional boot.









