Overview
The Pro Comp PR2128 is a PRO-M monotube rear shock absorber for the 2017–2021 Ford F-250 and F-350 Super Duty. It is built for trucks with no lift and measures 31.6 inches extended and 19.6 inches collapsed.
The shock uses a monotube body in which an internal floating piston separates the oil from the nitrogen charge, which Pro Comp says prevents cavitation. Vehicle-specific valving sets the damping for the Super Duty, and the 2.0-inch body is designed to carry more oil to control heat during heavy use.
Its loop upper and lower mounts and 14mm chrome hardened shaft are sized for a Super Duty at factory ride height. A polyurethane shock boot is included, and the body is silver powder-coated. This version is for trucks with no lift, so owners with a lift should choose a lift-specific PRO-M version.
Key features
- Monotube body with an internal floating piston
- Vehicle-specific multi-stage valving
- 2.0-inch shock body with increased oil capacity
- Redesigned wiper seal
- 14mm chrome hardened shaft
- Silver powder-coated finish
Stock height considerations
A stock-height Super Duty is built around factory ride height, so the shock is set up to match that geometry. Lift or leveling changes the mount angles and the stroke, which can cause the shock to bind or run short. If the truck has been lifted, measure the height before choosing a replacement.
Look at the old shock before replacing it. Leaks, a dented shaft, a worn bushing or a split boot all signal wear. Inspect the rear springs and bushings too, since sagging springs change how the damper works. Replace shocks in pairs to keep the ride even across the rear axle. Clean the mounting surfaces before installing the new unit. Recheck the bolts after the first few drives.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | PR2128 |
| Shock series | PRO-M |
| Shock type | Monotube, nitrogen gas charged |
| Position | Rear |
| Extended length | 31.6 in |
| Collapsed length | 19.6 in |
| Shock body diameter | 2.0 in |
| Shaft | 14mm chrome hardened |
| Upper mount | Loop |
| Lower mount | Loop |
| Finish | Silver powder coat |
| Lift height | No lift |
| Boot | Polyurethane, included |
Vehicle fitment
It fits the 2017–2021 Ford F-250 Super Duty and the 2017–2021 Ford F-350 Super Duty in the King Ranch, Lariat, Limited, Platinum, XL and XLT trims.
Super Duty models from 2022 and later, and the Ford F-450, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This shock is set up for stock height. On a lifted truck the extended and collapsed lengths will not match the installed suspension, so a lift-specific part from the same series is the better choice.
What’s included
One rear shock with its loop mounts and polyurethane boot. Confirm the mounting hardware suits your installation before starting.









