Select your vehicle
-13%

Pro Comp 2.5″ PRO-VST Coilover Front Shocks – 57014BX-1

Pro Comp Suspension

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Pro Comp 2.5 inch PRO-VST front coilover shock, part number EXP57014BX-1
  • Hard-anodized monotube body with a 2.5 inch shock body diameter
  • 17-4 PH stainless steel shaft, chrome plated
  • Vehicle Specific Tuning for on-road ride and off-road performance
  • Fits a 6 to 7 inch lift on 2003–2023 Toyota 4Runner, 2007–2014 FJ Cruiser and 2005–2023 Toyota Tacoma

Description

Overview

The Pro Comp 2.5 inch PRO-VST front coilover EXP57014BX-1 is a gas charged monotube shock built for off-road use. It fits a 6 to 7 inch lift on 2003–2023 Toyota 4Runner, 2007–2014 FJ Cruiser and 2005–2023 Toyota Tacoma models.

The PRO-VST uses a hard-anodized, thick wall impact forged body with a 2.5 inch shock body for maximum damping capacity. Vehicle Specific Tuning means each shock is tuned for a given vehicle, aiming for good ride quality on pavement and strong performance on rough trails.

Key features

  • Hard-anodized thick wall impact forged body
  • 2.5 inch shock body diameter
  • Monotube design with gas charge
  • 17-4 PH stainless steel shafts
  • Chrome plated shaft for corrosion and abrasion resistance
  • Vehicle Specific Tuning

Choosing a lift range

Coilovers for a larger lift need to match the lift height closely. A shock designed for one lift range may not give the right spring preload or travel for another, so measure your current setup before ordering. Consider the tires and bumpers you run, since added weight changes how the shock works.

Monotube shocks with a gas charge are common on trucks used off road because they resist fade during repeated hard use. Check the mounts, bushings and bump stops when installing new coilovers, and look for wear on the shaft and body after trail use. A regular inspection helps catch problems before they affect control.

  • Measure lift height before choosing a coilover
  • Check mounts and bushings during installation
  • Look for shaft scoring or oil on the body

Specifications

Brand Pro Comp Suspension
Part number EXP57014BX-1
Shock series PRO-VST
Shock type Coilover, monotube, gas charged
Position Front
Body diameter 2.5 inch
Lift height 6 to 7 inch
Shaft 17-4 PH stainless steel, chrome plated
Body Hard-anodized, thick wall, impact forged
Fitment Direct fit

Vehicle fitment

It fits 2003–2023 Toyota 4Runner models, 2007–2014 Toyota FJ Cruiser models and 2005–2023 Toyota Tacoma models, all for a 6 to 7 inch lift.

The list does not include the Toyota Tundra, Land Cruiser or other Toyota models, and it covers only the 6 to 7 inch lift range. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Check that your lift height falls within 6 to 7 inches before installing these coilovers. Front lift changes camber and caster, so get an alignment after installation.

What’s included

One PRO-VST front coilover shock absorber, part EXP57014BX-1.

Fitment

VehicleYearsTrims
Toyota 4Runner2003–2024Limited, Nightshade, SR5, SR5 Premium, Sport, TRD Off-Road, TRD Off-Road Premium, TRD Pro, TRD Sport, Trail, Venture
Toyota FJ Cruiser2007–2014Base, TRD Special Edition, Trail Teams Special Edition
Toyota Tacoma2005–2023Base, Limited, Pre Runner, SR, SR5, TRD Off-Road, TRD Pro, TRD Sport, Trail, X-Runner

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will these coilovers fit a 2015 Toyota Tacoma?

Yes. It fits 2005–2023 Toyota Tacoma models, so a 2015 Tacoma is covered for a 6 to 7 inch lift. Confirm fit for your vehicle's year, model and trim before ordering.

What is the lift range for this front coilover?

It fits a 6 to 7 inch lift. Check your lift height before ordering. It fits the 4Runner, FJ Cruiser and Tacoma models only.

What shaft material does the PRO-VST use?

The shafts are 17-4 PH stainless steel, precipitation hardened and chrome plated for corrosion and abrasion resistance. Pro Comp lists those shafts as part of what keeps the coilover durable in off-road use.

Is this coilover a monotube design?

Yes. It is a monotube shock with a hard-anodized body that is 2.5 inches in diameter. The hard anodizing reduces friction and bore wear inside the shock body.

Can aftermarket bumpers change how these coilovers perform?

Yes. Heavier bumpers, winches and accessories add weight to the front end and can change how the coilover compresses. Account for added weight when planning the lift, and recheck ride height and alignment after adding equipment.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon