Overview
The Pro Comp PRO-X 920508B is a twin tube shock absorber with a 20.6-inch extended length and a 12.7-inch collapsed length, sold individually. It fits 2001-2012 Chevrolet Avalanche, Silverado HD and GMC Sierra HD trucks, with the specific years and models covered in the fit details below.
A twin tube shock uses a pressure tube inside a larger reserve tube, a common design for everyday driving. The PRO-X is a general-purpose twin tube for vehicles that see mostly paved roads with some off-road use. Its extended length suits lifted trucks, and its 10-stage velocity sensitive valving handles a range of road conditions.
The shaft is 5/8-inch chrome hardened, and the piston is a 1-3/8-inch nylon banded design. The Teflon rebound stop supports a comfortable highway ride while still handling demanding driving. The shock is nitrogen stabilized, gas charged, and finished in black powder coat.
Key features
- Twin tube design that Pro Comp describes as general-purpose for mostly paved roads with occasional off-road use
- 20.6-inch extended length for lifted trucks
- 10-stage velocity sensitive valving
- 5/8-inch chrome hardened shaft
- 1-3/8-inch nylon banded piston
- Teflon rebound stop
- Nitrogen stabilized and gas charged
Lift height and HD trucks
On heavier trucks, the shock works hard under load, so damping and mount strength matter more than they do on light vehicles. A lifted HD truck needs a shock with enough extension to cover full droop, and the shock should not run out of travel on the bumps. Compare the lift on your truck with the shock’s extended and collapsed lengths before fitting.
Shocks often wear alongside sway bar links, ball joints and bushings, so inspect those parts while the truck is raised. Boots keep grit off the piston rod, and a clean rod helps seals last. Fit new shocks in pairs on each axle to keep the truck’s handling consistent under load.
- Check sway bar links and bushings
- Compare lift height with shock lengths
- Inspect the piston rod for pitting
- Fit shocks in pairs on each axle
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 920508B |
| Shock series | PRO-X |
| Shock type | Twin tube, gas charged, nitrogen stabilized |
| Extended length | 20.6 inches |
| Collapsed length | 12.7 inches |
| Travel length | 7.06 inches |
| Body diameter | 2.0 inches |
| Piston | 1-3/8 inch nylon banded |
| Shaft | 5/8 inch chrome hardened |
| Valving | Velocity sensitive, 10 stage |
| Rebound stop | Teflon |
| Finish | Black powder coat |
| Location | Universal |
| Sold as | Single shock, sold individually |
Vehicle fitment
Fits the 2007-2012 Chevrolet Avalanche and 2002-2006 Chevrolet Avalanche 2500, the 2001-2006 Chevrolet Silverado 2500 HD, the 2001-2003 and 2005-2006 Chevrolet Silverado 1500 HD, the 2007 Chevrolet Silverado 1500 HD Classic, the 2001-2006 GMC Sierra 2500 HD, the 2001-2003 and 2005-2006 GMC Sierra 1500 HD, and the 2007 GMC Sierra 2500 HD Classic.
The list does not include the Chevrolet Silverado 1500 or GMC Sierra 1500 models without the HD designation, and no model year after 2012 is listed.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One shock absorber, sold individually.
Not included: the optional shock boot, which is sold separately.









