Overview
The Pro Comp PRO-X 920500B is a twin-tube shock with eyelet mounts at both ends. It fits 1995–2005 Chevrolet Blazer and S10, 1995–2001 GMC Jimmy, 1995–2004 GMC Sonoma and 1995 Toyota Pickup vehicles. It extends to 20.6 in and is offered in extended lengths for lifted trucks.
The PRO-X is a general-purpose shock for vehicles that see mostly paved roads with occasional off-road use. It uses 10-stage velocity-sensitive valving that works across a range of road conditions. The 5/8 in chrome-hardened shaft has a Teflon rebound stop, and the shock is nitrogen stabilized and sold individually.
The shock measures 20.59 in extended and 12.68 in compressed, with 7.64 in of travel. The body diameter is 2.0 in, and both mounts are eyelets.
Key features
- Twin-tube design for general-purpose use
- 10-stage velocity-sensitive valving
- 5/8-inch chrome-hardened shaft
- 1-3/8-inch nylon banded piston
- Teflon rebound stop
- Black powder-coat finish with eyelet top and bottom mounts
Eyelet mounts and bushings
Eyelet mounts rely on a rubber or polymer bushing pressed into the eye, and that bushing is often the first part to wear. A worn bushing lets the shock knock, drift sideways and load the mounting bolt unevenly. Because the bushing is inexpensive compared with the shock, it is smart to check it whenever a shock is changed.
Extended-length shocks also need room to travel. Check that the new shock clears the frame, axle and any brake hose at full droop and full compression. A helper can hold the wheels while you cycle the suspension by hand to confirm clearance.
- Check eyelet bushings for cracks or flattening
- Confirm clearance at full droop
- Tighten fasteners to the correct torque
- Replace shocks in pairs on each axle
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 920500B |
| Shock series | PRO-X |
| Shock type | Twin tube |
| Extended length | 20.6 in |
| Compressed length | 12.7 in |
| Travel length | 7.64 in |
| Body diameter | 2.0 in |
| Top mount | Eyelet |
| Bottom mount | Eyelet |
| Charge | Gas charged, nitrogen stabilized |
| Valving | 10-stage, velocity sensitive |
| Piston | 1-3/8-inch nylon banded |
| Shaft | 5/8-inch chrome hardened |
| Finish | Black powder coat |
| Sold as | Individually |
| Fitment | Direct fit |
Vehicle fitment
Fits these vehicles:
- 1995–2005 Chevrolet Blazer
- 1995–2004 Chevrolet S10
- 1995–2001 GMC Jimmy
- 1995–2004 GMC Sonoma
- 1995 Toyota Pickup
Other years and models are not covered. The Blazer after 2005 and the S10 after 2004 fall outside this fit.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One shock, sold individually. Not included: the shock boot, which is sold separately.









