Overview
The Pro Comp 918514B is a PRO-X twin tube shock absorber for the 1986–1995 Toyota 4Runner and Toyota Pickup, and for the 1993–1995 Toyota T100 and T100 One-Ton. It has an 18.7-inch extended length, an 11.5-inch collapsed length and 7.06 inches of travel.
This is a general-purpose twin tube design for trucks and SUVs that are mostly driven on pavement with occasional off-road trips. Pro Comp uses 10-stage velocity sensitive valving to handle a range of road conditions, with a 1-3/8-inch nylon banded piston and a 5/8-inch chrome hardened shaft.
The shock uses a stem upper mount and a loop lower mount, with a black powder-coated body and nitrogen stabilized gas charge. The optional shock boot is an extra that is not included.
Key features
- Twin tube design for general-purpose use
- 10-stage velocity sensitive valving
- 1-3/8-inch nylon banded piston
- 5/8-inch chrome hardened shaft
- Nitrogen stabilized
- Black powder-coated finish
Pickup and 4Runner upkeep
On compact trucks and 4Runners, the shock sits close to the frame and is exposed to road salt, mud and rock debris. Rust around the mounts is a common reason for replacement, so look at the upper stem and lower loop before buying. A twin tube design with nitrogen stabilized gas suits pavement driving with occasional trail trips.
Older Toyotas often have worn bushings in the control arms and leaf spring hangers, which can affect how the shock loads. Replacing a shock with worn bushings may not fix the ride issue. Check the bushings and the body mounts as part of the same job, and keep the shocks matched in pairs.
- Clean mounts before fitting
- Check the rubber bushings at both ends
- Inspect the shock body for leaks
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 918514B |
| Shock series | PRO-X |
| Shock type | Twin tube, gas charged (nitrogen stabilized) |
| Location | Universal |
| Extended length | 18.7 in |
| Collapsed length | 11.5 in |
| Travel length | 7.06 in |
| Body diameter | 2.0 in |
| Piston | 1-3/8 in nylon banded |
| Shaft | 5/8 in chrome hardened |
| Upper mount | Stem |
| Lower mount | Loop |
| Finish | Black powder coat |
| Boot | Optional, not included |
Vehicle fitment
It fits the 1986–1995 Toyota 4Runner in the DLX and SR5 trims, the 1986–1995 Toyota Pickup in the Base, Base Turbo, DLX, SR5 and SR5 Turbo trims, the 1993–1995 T100 in the Base, DX and SR5 trims, and the 1993 and 1995 T100 One-Ton in the DLX trim.
Toyota models from 1996 onward are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The 4Runner and Pickup share the same model years. Check the stem upper mount and loop lower mount against the existing bracket before final tightening, and confirm the 7.06-inch travel suits the suspension being replaced.
What’s included
One twin tube shock with a stem upper mount. The optional boot is not included.
Not included: the optional boot and any extra brackets.









