Select your vehicle
-13%

Pro Comp PRO-M Monotube Front Shock Absorber – PR2032

Pro Comp Suspension

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Pro Comp PRO-M front monotube shock, part PR2032, sold individually
  • Designed for 0 to 6 inches of lift
  • Extended 25.8 in, collapsed 17 in
  • Fits the 2005 to 2016 Ford F-250 and F-350 Super Duty

Description

Overview

The Pro Comp Suspension PR2032 is a PRO-M front monotube shock for Ford Super Duty trucks from 2005 to 2016. It covers a lift range of 0 to 6 inches, and 6 inches is the top of that range.

Each shock is nitrogen gas charged, with a floating piston that separates oil and gas. Its wiper seal design helps keep the shock from leaking, and the valving is vehicle specific.

Key features

  • Front monotube design for 0 to 6 inches of lift
  • Extended length 25.8 inches, collapsed length 17 inches
  • Nitrogen gas charged with floating piston
  • Multi-stage disc pack valving
  • 14 mm chrome hardened shaft
  • Wiper seal design
  • Polyurethane shock boot included

Wide lift range, careful fit

A shock rated across a broad lift range has to balance its length against both ends of that range, so the fit at the low end and high end of the lift can feel different. Measuring your truck’s current height and comparing it with the original front shock avoids surprises. A higher lift also moves the axle farther from the frame, which changes how much clearance the shock body needs at full extension.

Super Duty front ends are built to carry heavy loads, so the damper handles strong compression forces when the truck is towing or carrying a payload. Consistent damping depends on healthy bushings, tight fasteners, and clean seals. Trucks that see mud or water crossings should have the boot checked regularly, since debris can drive grit past the seal.

  • Measure lift before choosing a shock
  • Check loop bushings for play
  • Wipe the shaft after water crossings
  • Recheck steering clearance after the first drive

Specifications

Brand Pro Comp Suspension
Part number EXPPR2032
Shock series PRO-M
Position Front
Extended length 25.8 in
Collapsed length 17 in
Upper mount Loop
Lower mount Loop
Lift 0 to 6 in
Finish Silver powder coat

Vehicle fitment

It fits the 2005 to 2016 Ford F-250 Super Duty and F-350 Super Duty, in Cabela’s, FX4, Harley-Davidson Edition, King Ranch, Lariat, Platinum, XL and XLT trims.

Look at your truck’s year, model and trim before buying, including whether it is a 2017 or later Super Duty or an F-450 or F-550.

Installation notes

The lift range on this shock is wide, so confirm the lift on your Super Duty before ordering, and check the alignment afterward if the truck is raised. The 25.8 inch extended and 17 inch collapsed lengths should be compared with the original front shock. The loop mounts should be checked for fit and the boot inspected for clearance at full compression.

Measure the lift on your Super Duty before ordering, then check the loop mounts are seated and the shock clears the front spring and frame through full compression, and confirm the boot is seated correctly on the shaft.

Confirm the front shock clears the steering linkage and the brake hoses at full steering lock on both sides of the Super Duty.

What’s included

One PRO-M front monotube shock with polyurethane boot under part number EXPPR2032.

Fitment

VehicleYearsTrims
Ford F-250 Super Duty2005–2016Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, Platinum, XL, XLT
Ford F-350 Super Duty2005–2016Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, Platinum, XL, XLT

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the PR2032 fit a 2010 Ford F-350 Super Duty?

Yes. It fits the 2005 to 2016 F-350 Super Duty, which includes 2010 models in Cabela's, FX4, King Ranch, Lariat, Platinum, XL and XLT trims.

What lift is the PR2032 designed for?

It is designed for 0 to 6 inches of lift, with a 25.8 inch extended length and a 17 inch collapsed length. Measure your truck's current lift before ordering to confirm the shock matches your setup.

Is the PR2032 a front shock?

Yes. The position is front, and the shock uses loop mounts at both ends with a polyurethane boot. Check that your existing brackets are loop style before fitting.

How can I tell if a front shock is worn?

Look for oil leaking down the body, a bouncy ride after bumps, or the nose of the truck diving more than usual under braking. Uneven tire wear and a clunk over rough pavement can also point to a worn damper, so inspect the mounts as well.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon