Overview
The Pro Comp 51005B is a Pro Runner front upper control arm with uniball ball joints and a billet dust cap. It fits 15-Current GM Colorado and Canyon models.
The factory upper control arms use weak ball joints and stamped steel construction that is not built for off-road use. The Pro Runner arm replaces them with oversized stainless steel FK uniball joints, 1 inch chromoly tubular construction and reinforced pivot bushing mounts. It suits lifted, leveled or stock trucks, and the arms are supplied as a pair.
Key features
- Front upper control arms for 2WD and 4WD models
- 1.25 inch stainless steel FK uniball ball joints
- Heavy-duty chromoly tubular construction
- Reinforced pivot bushing mounts
- Durable PTMEG pivot bushings with grease zerk fittings
- Black powder coat finish
- Billet machined dust cap keeps dirt and debris out of the uniball
- Supplied as a pair
Before you buy
Upper control arms work with the lower arms, springs and steering to set wheel position and keep the axle located under load. When a truck is lifted or runs larger tires, the upper joints carry more angle and more stress, which is why many owners replace them together with their lower arms and bushings.
Check the joint and bushings on your current arms before ordering. Look for play at the ball joint, cracked welds, torn boots and bushings that feel loose or dry. If the factory arms show these signs, a complete upper pair is a practical way to address them at the same time. Plan for an alignment after installation, since changes to the upper arm geometry affect caster and camber.
- Inspect the existing upper joints and bushings before removal
- Plan an alignment appointment immediately after installation
- Grease the zerk fittings on a set schedule once the arms are in service
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 51005B |
| UPC | 614901213539 |
| Product type | Upper control arms (A-arms) with uniball ball joints |
| Position | Front upper |
| Type | Tube |
| Ball joints | 1.25 inch stainless steel FK uniball |
| Construction | Chromoly tubular, 1 inch |
| Bushings | PTMEG pivot bushings with zerk fittings |
| Finish | Black powder coat |
| Dust cap | Billet machined |
| Quantity | Pair |
| Drive types | 2WD and 4WD models |
Vehicle fitment
The 51005B is built for 2WD and 4WD 15-Current GM Colorado and Canyon models. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Suspension parts affect steering, braking and handling, so professional installation is recommended. Torque every fastener to specification, use correct hardware, and re-check fasteners after the first miles of driving. Have the alignment checked after any suspension work, and confirm brake line, driveshaft and tire clearance afterward. Check local regulations on lift and vehicle modification, and check headlight aim after any ride height change.
What’s included
A pair of front upper control arms with uniball ball joints, PTMEG pivot bushings and billet dust caps.
Not included: Lower control arms, shocks, springs and alignment service.

























