Overview
The Crown Automotive 52001162 is a front lower replacement control arm for Jeep Wrangler TJ (1997–2006) and Wrangler LJ (2004–2006) models. It is made for the driver or passenger side, as the position states.
The arm is a factory replacement made of stamped steel, with bushings included. It mounts in the front lower position.
Key features
- Factory replacement design
- Stamped steel construction
- Bushings included
- Driver or passenger side front lower position
Front lower arms and the bushings
The lower control arm carries the axle and wheel and controls fore and aft movement, so its bushings and ball joint have a large effect on steering and ride. Stamped factory-style arms are a practical replacement when the original arm is bent or the bushings have torn. Bushings wear with age and exposure to road grime, and replacing them with the arm keeps the geometry close to the original.
Check the old arm for bends, cracks at welds and rust around the mounts before removing it. When the new arm is installed, tighten the bolts to the factory torque setting and have the front end aligned. Front lower arms are often replaced in pairs so both sides match, and worn tie rod ends are worth inspecting during the same job.
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 52001162 |
| UPC | 848399012620 |
| Position | Front lower |
| Side | Driver or passenger |
| Material | Stamped steel |
| Included | Bushings |
| Fitment type | Direct fit |
Vehicle fitment
It fits 2004–2006 Jeep Wrangler LJ (Unlimited and Unlimited Rubicon) and 1997–2006 Jeep Wrangler TJ (65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X).
Other Wrangler generations, including the 2007–2018 JK, and Grand Cherokee models are not in this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Bushings are included. Not mentioned: ball joints, bolts and other hardware.









