Overview
The Pro Comp 57003B is a pair of upper control arms with 1.5-inch Uniball joints, made for the 2010 to 2024 Toyota 4Runner and the 2007 to 2014 Toyota FJ Cruiser in 2WD and 4WD. The 4Runner fit covers 2010 and newer models, and the FJ fit covers 2WD and 4WD trucks.
The factory upper arms on these trucks have weak ball joints and stamped steel construction that is not designed for off-road use. These arms replace them with oversized stainless steel FK Uniball joints on heavy-duty chromoly tubing, with reinforced bushing mounts to limit flex.
Because the arms come in pairs, one purchase covers both sides of the truck. The 4Runner fit is 2010 and newer, and the FJ fit covers 2007 to 2014 2WD and 4WD trucks, so verify the drivetrain and model year on your truck before buying.
Key features
- 1.5-inch Uniball joints in stainless steel FK
- Heavy-duty chromoly construction
- Reinforced bushing mounts
- Zerk fittings for easy service
- Dust caps included
- Black powder coat finish
Ball joints and wear checks
Upper control arms locate the axle and set part of the caster and camber angles, so their joints and pivot bushings matter for steering and tire wear. Worn bushings let the axle shift under load, which can make the truck wander or cause uneven tire wear. A worn ball joint can click, knock or feel loose when the wheel is lifted and moved.
When choosing upper arms, look at how the joints are built and how the bushing mounts are reinforced. Related parts such as lower arms, sway bar links and tie rod ends are often inspected at the same time, since they all affect how the front end moves. Grease the fittings on a set schedule and recheck the joints after the arms have been used hard off road.
- Listen for clicks or knocks over bumps
- Check bushings for cracks and split rubber
- Schedule an alignment after installation
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 57003B |
| UPC | 614901214109 |
| Position | Front upper |
| Ball joints | 1.5-inch Uniball, stainless steel FK |
| Tubing | Heavy-duty chromoly, tubular |
| Dust caps | Included |
| Finish | Black powder coat |
| Sold as | Pair |
Vehicle fitment
Fits 2010 to 2024 Toyota 4Runner models, and 2007 to 2014 Toyota FJ Cruiser 2WD and 4WD models. Other Toyota trucks and SUVs are not part of this fitment.
The FJ Cruiser fit covers 2007 to 2014 only, and earlier 4Runner generations are not covered. Verify the year, model and drivetrain on your truck before ordering.
Installation notes
Upper control arm changes affect caster, camber and steering geometry, so schedule an alignment after installation. Grease the zerk fittings on the pivot bushings once the arms are installed.
What’s included
Two upper control arms, sold in pairs, with dust caps included.































