Overview
The Pro Comp Suspension EXPPR2119 is a PRO-M rear monotube shock for the 2015 to 2017 Ford F-150. It is rated for trucks with 0 to 2 inches of lift or drop, and it is sold individually.
The shock is nitrogen gas charged. Its floating piston and multi-stage valving work together to give a consistent ride on and off road.
Key features
- Monotube rear design
- Designed for 0 to 2 inches of lift or drop
- Nitrogen gas charged
- Multi-stage disc pack valving
- 14 mm chrome hardened shaft
- Polyurethane boot included
Height limits for rear shocks
Rear shocks rated for a narrow lift range depend on the truck staying close to that height. A rear shock that is too short can limit droop and make the suspension feel harsh, while one that is too long can reduce compression travel and strain the mounts. Measure the truck’s height at each rear wheel before buying and again after any load or accessory changes.
Many trucks in this class carry bumpers, spare tire carriers and hitches that add weight to the rear. Inspect the shock body, boot and loop mounts after the first drive, and check for oil on the body. Replacing rear shocks in pairs keeps the rear end balanced and predictable.
- Measure rear height at both wheels
- Check clearance with the spare tire carrier
- Inspect the boot after the first drive
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | EXPPR2119 |
| Shock series | PRO-M |
| Position | Rear |
| Extended length | 29.9 in |
| Collapsed length | 18.7 in |
| Upper and lower mount | Loop |
| Lift | 0 to 2 in |
| Finish | Silver powder coat |
Vehicle fitment
It fits the 2015 to 2017 Ford F-150, in several trims including XL, XLT, Lariat, King Ranch, Limited and Platinum.
Confirm fit for your vehicle’s year, model and trim before ordering, including 2009 to 2014 and 2018 and later F-150 trucks.
Installation notes
Because this shock is rated for 0 to 2 inches of lift or drop, measure the truck’s current height before ordering, and compare the 29.9 inch extended and 18.7 inch collapsed lengths with the rear shock being removed. Loop mounts need to line up with the factory brackets, and the boot should be clear of the frame and the spring at full compression once installed.
Confirm the lift on the truck is within the 0 to 2 inch range, since the shock’s length and valving are set for that height. Loop mounts should be checked against the factory brackets, and the rear shock body should be checked for clearance at full extension. Test the shock by hand after installation to confirm the damper moves smoothly in both directions, and look for any sign of oil on the body after the first drive.
Confirm the rear travel is clear of the frame and any bumper or spare tire carrier fitted to the vehicle.
What’s included
One PRO-M rear monotube shock under part number EXPPR2119.









