Overview
The ZX2084 is a front Pro Runner monotube shock absorber for a 1.5 to 3 inch lift. It has a 2 inch body, a nitrogen gas charge and a brushed zinc finish with clear coat. Confirm fit for your vehicle’s year, model and trim before ordering, since no vehicle is tied to this part number.
The monotube design is intended to resist cavitation during compression and rebound, helping the shock shed heat more efficiently than a twin tube design. The package includes a rubber bushing and black polyurethane boots. A 90-day ride guarantee and a lifetime warranty that transfers to a new owner apply to this shock.
A monotube keeps the oil and nitrogen gas in one body, separated by a floating piston, so the damper holds up under hard use. The ZX2084 is built for a 1.5 to 3 inch lift at the front. Its 2 inch body and brushed zinc finish with clear coat should be checked against your current shock before fitting, since a 1.5 to 3 inch lift is a range, not a single height.
Key features
- Front mounting position
- Nitrogen gas charged monotube
- 2 inch diameter body
- Brushed zinc finish with clear coat
- Rubber bushing and black polyurethane boots included
Choosing the right lift range
A 1.5 to 3 inch lift range is wide, so the shock’s fit depends on where a truck sits within it. Measure the current height at the front and compare it with the range before choosing a shock, since a truck near the top of the range may need more damping control than one near the bottom. The 2 inch body and nitrogen charge relate to how the shock handles heat and foaming under load.
When the lift changes, the shock’s length and stroke should be checked against the fully extended and compressed positions, not just the lift number. Worn bushings or boots can also affect how the shock sits, so inspect them at the same time as the shock itself.
- Measure ride height at both front corners
- Check the bushing and boot during installation
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | ZX2084 |
| UPC | 614901094909 |
| Shock series | Pro Runner |
| Position | Front |
| Lift height | 1.5 to 3 in. |
| Body diameter | 2 in |
| Charge | Nitrogen, gas charged |
| Finish | Brushed zinc, clear coat |
| Bushing | Rubber, included |
| Boots | Black polyurethane, included |
| Ride guarantee | 90 days |
| Warranty | Lifetime, transferable |
Vehicle fitment
Measure your truck’s lift height and confirm it falls within 1.5 to 3 inches. Check fit for your year, model and trim before buying.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One front Pro Runner monotube shock with rubber bushing and black polyurethane boots.



























