Overview
The Pro Comp Suspension ES3000 320580 is a front hydraulic shock absorber for the 2000–2010 Chevrolet Suburban 2500 and the 2000–2010 GMC Yukon XL 2500. It fits the Suburban Base, LS and LT, and the Yukon XL SLE and SLT. It is rated for a 6 in. lift and uses the factory upper and lower mounts.
The shock is a twin tube cellular gas design with 10-stage velocity-sensitive valving. The 5/8 inch chrome-hardened piston rod and Teflon rebound stop work together, and the double welded mounts add strength. Pro Comp covers the ES3000 with its limited lifetime warranty.
Key features
- Twin tube cellular gas design
- 10-stage velocity-sensitive valving
- 5/8 inch chrome-hardened piston rod
- Teflon rebound stop
- Double welded shock mounts
- Factory upper and lower mounts
- Rated for a 6 in. lift
- Pro Comp Suspension limited lifetime warranty
Heavy-duty use
Suburbans and Yukon XL trucks are heavy vehicles, and their front shocks handle more load than those on lighter SUVs. Towing, full passenger loads and rough driving all increase the work the damping does on each stroke. Keeping the shock and its mounts in good condition helps the front end stay controlled under those conditions.
Before fitting a shock on a heavier truck, check the mounts and hardware carefully. Look for cracked rubber, worn bushings and bolts that have stretched or rusted. If the truck has been used for hard towing, inspect the front suspension components together, since the stress is shared among them.
A heavily loaded truck may also need a fresh look at ride height. If the suspension sits lower on one side, the shock on that side works differently from the other. Even height side to side helps the shocks wear evenly and keeps the steering predictable.
- Check mount bushings for cracks
- Inspect bolts for stretch or rust
- Compare ride height side to side
- Inspect the front suspension together
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 320580 |
| UPC | 614901108941 |
| Shock series | ES3000 |
| Position | Front |
| Type | Hydraulic, twin tube cellular gas design |
| Extended, collapsed and travel lengths | Vehicle specific |
| Upper mount | Factory |
| Lower mount | Factory |
| Lift height rating | 6 in. lift |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
It fits the 2000–2010 Chevrolet Suburban 2500 (Base, LS and LT) and the 2000–2010 GMC Yukon XL 2500 (SLE and SLT).
The 1999 and earlier Suburban 2500, the 2011 and later models, and the Yukon XL 1500 are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The shock is rated for a 6 in. lift, so check your truck’s suspension height against that figure before fitting. The factory mounts mean the shock goes in at the original points, and the vehicle-specific lengths should be compared with the old unit.
What’s included
One shock absorber, part 320580.
Not included: the dust boot.












