Overview
The Pro Comp ES3000 Series shock absorber, part number 327509, uses factory upper and lower mounts and has vehicle-specific extended, collapsed and travel lengths. It suits a truck only when the mounting centers match the original shock.
The ES3000 design is a twin-tube, gas-charged shock. Oil and gas work together inside the tubes, and the 10-stage velocity-sensitive valving changes damping with the speed of the movement. The internal parts are the same as the rest of the ES3000 line, so the difference between part numbers comes down to length and mount style.
Key features
- 10-stage velocity-sensitive valving that changes damping with movement speed.
- A 5/8 inch chrome-hardened piston rod.
- A Teflon rebound stop.
- Double-welded shock mounts for strength.
- Limited lifetime warranty coverage applies to this shock.
Choosing between similar part numbers
Within one shock series, part numbers often differ only in length and mount style, so two units that look alike can behave very differently on a truck. Start by identifying the mount type on the old shock, then measure its extended and collapsed lengths and the travel between the mounting points. A shock that is slightly too long can bind at full droop, while one that is too short can strain its mounts and limit the suspension.
Gas-charged twin-tube designs handle heat and repeated compression better than basic units, which helps on rough roads and trails. Still, the internal valving does not change the fit, so a good damper in the wrong length will not improve the ride. Keep the old shock until the new one is confirmed, and note which side it came from so the replacement goes back in the same position.
- Identify the mount style before comparing numbers
- Measure at both mounts with the truck at normal height
- Keep the old unit until the fit is confirmed
- Label which side each shock came from
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 327509 |
| UPC | 614901042658 |
| Shock series | ES3000 |
| Extended length | Vehicle specific |
| Collapsed length | Vehicle specific |
| Travel length | Vehicle specific |
| Upper mount | Factory |
| Lower mount | Factory |
| Adjustable | No |
| Remote reservoir | No |
| Body type | Hydraulic, gas charged |
| Finish | White |
| Dust boot included | No |
| Sold as | Each |
Vehicle fitment
Confirm fit against your vehicle’s year, model and trim before buying, and measure the original shock first.
Vehicle-specific lengths mean two trucks of the same year can need different shocks. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Pull the length of the shock you are replacing at both mounts so you can compare it with the vehicle-specific values before buying.
What’s included
One ES3000 shock absorber.
Not included: the dust boot, which is not part of this shock.











