Overview
The ES3000 shock absorber, part number 332004, uses factory upper and lower mounts with vehicle-specific lengths. Fit depends on the vehicle, so the mount-to-mount length of the original shock matters as much as the part number.
It is a twin-tube design with a gas charge and 10-stage velocity-sensitive valving. The valving is tuned to change damping as the speed of the movement changes, which suits both daily driving and off-road use.
The shock is gas-charged, with a 5/8 inch chrome-hardened piston rod and a Teflon rebound stop. Measuring the original shock is still needed because the lengths are vehicle specific.
Key features
- 10-stage velocity-sensitive valving.
- A 5/8 inch chrome-hardened piston rod.
- A Teflon rebound stop.
- Double-welded shock mounts for strength.
- Limited lifetime warranty from Pro Comp.
Damping on rough trails
Valving determines how the shock resists movement as the speed of the suspension changes. Slow movements such as body roll on a long bend need one level of resistance, while fast movements from rocks and ruts need another. A twin-tube gas design keeps the oil under pressure, which helps the damping stay consistent after repeated hard use.
Because the lengths are vehicle specific, the rebound stop and the mount positions matter as much as the damping. Check the shock’s full extension against the vehicle’s travel so the rebound stop does the limiting rather than the mounts. Inspect the rod and seals regularly, and clean the rod after mud or sand so grit does not wear the seal.
- Check full extension against travel
- Wipe the rod after mud or sand
- Look for seepage at the rod seal
- Re-check the mount bolts after the first runs
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 332004 |
| UPC | 614901042931 |
| Shock series | ES3000 |
| Extended length | Vehicle specific |
| Collapsed length | Vehicle specific |
| Travel length | Vehicle specific |
| Upper mount | Factory |
| Lower mount | Factory |
| Adjustable | No |
| Body type | Hydraulic / gas charged |
| Finish | White |
| Dust boot included | No |
| Sold as | Each |
Vehicle fitment
Fit is not confirmed for part 332004, so measure the original shock mount to mount and check your truck’s year, model and trim before buying.
Vehicle-specific lengths are the main fit check for this shock. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Use the factory mounts to guide placement, then confirm that the shock reaches full extension without binding on the frame or axle.
What’s included
One ES3000 shock absorber.
Not included: a dust boot, which is not part of this purchase.











