Overview
The Pro Comp Suspension ES3000 320553 is a front hydraulic shock absorber for the 2002–2005 Dodge Ram 1500, in the Laramie, SLT and ST versions. It uses the factory upper and lower mounts, so it is set up to replace the original shock at the same points. Pro Comp rates it for a 4.5 in. lift.
The body is a twin tube cellular gas design with 10-stage velocity-sensitive valving. A 5/8 inch chrome-hardened piston rod and Teflon rebound stop are built into the shock, supporting a comfortable highway ride and capable handling of harder driving. The double welded mounts carry the Pro Comp Suspension limited lifetime warranty.
Key features
- Twin tube cellular gas design
- 10-stage velocity-sensitive valving
- 5/8 inch chrome-hardened piston rod
- Teflon rebound stop
- Double welded shock mounts
- Factory upper and lower mounts
- Rated for a 4.5 in. lift
- Pro Comp Suspension limited lifetime warranty
Signs the shock is worn
On a full-size pickup, front shocks control body motion over dips, braking and uneven road surfaces. When they begin to fail, the truck can nose-dive under braking, sway on turns or bounce several times after a bump. These changes usually develop slowly, so drivers often notice them only after comparing the feel with a fresh shock.
Wear on the rubber mounts is easy to overlook. Look for cracked or flattened bushings, bent brackets and loose bolts at the top and bottom of each shock. Driving with worn mounts can make a new shock noisy and can shorten its life.
A worn shock often comes with a worn sway bar link or ball joint. Inspect the front end as a whole when the shock comes off, and reinstall the new unit without pinching or twisting its mounts.
- Nose-dive under braking
- Extra bounce after bumps
- Cracked or flattened mount bushings
- Worn sway bar links alongside the shock
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 320553 |
| UPC | 614901695663 |
| Shock series | ES3000 |
| Position | Front |
| Type | Hydraulic, twin tube cellular gas design |
| Extended, collapsed and travel lengths | Vehicle specific |
| Upper mount | Factory |
| Lower mount | Factory |
| Lift height rating | 4.5 in. lift |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
It fits the 2002–2005 Dodge Ram 1500 in the Laramie, SLT and ST versions.
Other Ram 1500 model years, the Ram 1500 Base and the Ram 2500 and 3500 are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The 4.5 in. lift rating is the height Pro Comp designed the shock for, so a truck with a different lift should be checked before fitting. Because the mounts are factory, the shock replaces the original at the same points.
What’s included
One shock absorber, part 320553.
Not included: the dust boot.









