Overview
The Pro Comp Suspension ES3000 321509 is a hydraulic shock absorber from the ES3000 Series. It uses the factory upper and lower mounts, and its extended, collapsed and travel lengths are set to the vehicle. The shock is finished in white and sold as each.
The ES3000 is a twin tube cellular gas design built for road comfort and demanding driving. Its 10-stage velocity-sensitive valving adjusts to road conditions, a 5/8 inch chrome-hardened piston rod carries a Teflon rebound stop, and double welded mounts add strength. It carries the Pro Comp Suspension limited lifetime warranty.
Key features
- Twin tube cellular gas design
- 10-stage velocity-sensitive valving
- 5/8 inch chrome-hardened piston rod
- Teflon rebound stop
- Double welded shock mounts
- Factory upper and lower mounts
- White finish
- Pro Comp Suspension limited lifetime warranty
Matching a replacement shock
A shock absorber controls how quickly the spring compresses and rebounds, which keeps the tires in contact with the ground over bumps and during braking. On a truck that sees daily road use, the damping setting has a direct effect on steering feel and body control. Shocks that have lost damping let the body bounce several times after a dip, and the truck may wander in highway grooves.
When replacing one shock, look at the mounting style and the extended and collapsed lengths first, since a shock that is too long or too short will bind or limit travel. Shocks usually wear in pairs on the same axle, so inspect the other side as well. Check the rubber mounts and bushings while the shock is off, because cracked bushings can make a new shock feel loose.
- Inspect for oil leaking down the shock body
- Look for uneven tire wear across the axle
- Replace worn mounts or bushings at the same time
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 321509 |
| UPC | 614901041330 |
| Shock series | ES3000 |
| Type | Hydraulic, twin tube cellular gas design |
| Extended, collapsed and travel lengths | Vehicle specific |
| Upper mount | Factory |
| Lower mount | Factory |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
Confirm the year, model and trim against your vehicle before ordering. Then compare the factory mount points and vehicle-specific lengths with the shock on your truck.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One shock absorber, part 321509.
Not included: the dust boot.









