Select your vehicle
-13%

Pro Comp PRO-M Monotube Front Shock Absorber – PR2092

Pro Comp Suspension

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Pro Comp PRO-M front monotube shock, part PR2092, sold individually
  • Designed for 1.5 to 2 inches of lift
  • Extended 22.1 in, collapsed 14.1 in
  • Fits the 1999 to 2004 Grand Cherokee WJ and 1993 to 1998 Grand Cherokee ZJ

Description

Overview

The Pro Comp Suspension PR2092 is a PRO-M front monotube shock for Jeep Grand Cherokees with 1.5 to 2 inches of lift. It fits the 1999 to 2004 Grand Cherokee WJ and the 1993 to 1998 Grand Cherokee ZJ, and it is sold individually.

The shock is nitrogen gas charged. A floating piston separates the oil from the gas, which Pro Comp says prevents cavitation during compression and rebound. The 14 mm chrome hardened shaft and polyurethane boot are included.

Key features

  • Front monotube design for 1.5 to 2 inches of lift
  • Extended length 22.1 inches, collapsed length 14.1 inches
  • Nitrogen gas charged with floating piston
  • Multi-stage disc pack valving
  • 14 mm chrome hardened shaft
  • Polyurethane shock boot included

Eyelet mounts and lift range

Eyelet mounts at each end let a front shock pivot as the axle moves, and worn eyelets or bushings change how the shock loads. Before fitting, check that the mounts sit square in the factory brackets and that the body does not contact the front spring. A shock that is pinched or cocked will wear quickly and can make the steering feel loose.

A shock built for a limited lift range works best when the truck stays within that height. Grand Cherokees that have been raised further may need a longer or different unit. Replacing both fronts together keeps the damping balanced, and checking the upper bushing and the bump stop while the old shock is off is a good habit.

  • Measure ride height before choosing a replacement
  • Replace worn eyelet bushings with the shock
  • Check bump stops for cracks or compression

Specifications

Brand Pro Comp Suspension
Part number EXPPR2092
Shock series PRO-M
Position Front
Extended length 22.1 in
Collapsed length 14.1 in
Lift 1.5 to 2 in
Shaft 14 mm chrome hardened
Finish Silver powder coat

Vehicle fitment

It fits the 1999 to 2004 Jeep Grand Cherokee (WJ), including Laredo, Limited, Overland, Special Edition and Sport models, and the 1993 to 1998 Jeep Grand Cherokee (ZJ), including Base, Laredo, Limited, Orvis, SE, TSi and 5.9 Limited models.

It fits the WJ and ZJ Grand Cherokee only. Before ordering, match your vehicle’s year, model and trim against this fit.

Installation notes

The 22.1 inch extended and 14.1 inch collapsed lengths are the figures to compare with the front shock being removed. A 1.5 to 2 inch lift is the range covered, so a larger lift needs a different shock. Confirm the eyelet mounts fit the factory brackets on your Grand Cherokee, and check clearance at full compression.

Because this shock is built for 1.5 to 2 inches of lift, confirm the truck’s height before fitting. Check the eyelet mounts against the factory brackets and make sure the shock body clears the front spring at full compression.

What’s included

One PRO-M front monotube shock with polyurethane boot under part number EXPPR2092.

Fitment

VehicleYearsTrims
Jeep Grand Cherokee (WJ)1999–2004Laredo, Limited, Overland, Special Edition, Sport
Jeep Grand Cherokee (ZJ)1993–19985.9 Limited, Base, Laredo, Limited, Orvis, SE, TSi

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the PR2092 fit a 2001 Grand Cherokee WJ?

Yes. It fits the 1999 to 2004 Grand Cherokee WJ, including 2001 models in Laredo, Limited, Overland, Special Edition and Sport trims.

Does it also fit a ZJ Grand Cherokee?

Yes. It fits the 1993 to 1998 Grand Cherokee ZJ as well as the 1999 to 2004 WJ. Match your vehicle's year, model and trim to the fit before buying.

How much lift is the PR2092 designed for?

It is designed for 1.5 to 2 inches of lift, with a 22.1 inch extended length and a 14.1 inch collapsed length.

Can a front shock be replaced on its own?

It can, but replacing both fronts together keeps damping matched from side to side. If only one side is changed, the new shock may feel firmer or softer than the other. Check the mounts and bushings on the other side before ordering, since worn parts there will affect how the new shock performs.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon