Overview
The Pro Comp Suspension PR2025 is a PRO-M front monotube shock for the Dodge Ram 2500 with 0 to 2 inches of lift. It fits 1994 to 2010 models and 2011 to 2012 models, and it is sold individually.
The shock body is nitrogen gas charged, with a floating piston and multi-stage disc pack valving. Pro Comp describes its 2 inch body as having more oil capacity than a standard body.
Key features
- Front monotube design for 0 to 2 inches of lift
- 2 inch diameter body
- Extended length 24.3 inches, collapsed length 15.8 inches
- Nitrogen gas charged with floating piston
- Polyurethane shock boot included
Signs the front shock is worn
A front shock works with the springs, bushings and steering parts to control body motion over bumps and under braking. When it wears, the truck may bounce for a longer time after a dip, feel loose on the highway, or show oil on the outside of the body. Before blaming the shock, check the mounts for play and the boot for tears, since loose hardware can feel just like worn damping.
Heavy front axles put more load through the shock, so replacing both sides together keeps damping even from left to right. Worn ball joints, tie rod ends and control arm bushings can make a new shock feel unsettled, so inspect them at the same time. Re-torque the mounting hardware after the first few drives.
- Compare both front shocks for matching damping
- Inspect the boot for cracks or grit
- Look for oil residue along the body
- Check steering and suspension joints when replacing
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | EXPPR2025 |
| Shock series | PRO-M |
| Position | Front |
| Body diameter | 2 in |
| Extended length | 24.3 in |
| Collapsed length | 15.8 in |
| Upper mount | Stem |
| Lower mount | Loop |
| Lift | 0 to 2 in |
Vehicle fitment
It fits the 1994 to 2010 Dodge Ram 2500, in trims including Laramie, SLT, ST, SXT and Sport, and the 2011 to 2012 Ram 2500.
It does not fit the Ram 1500 or Ram 3500. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Compare the 24.3 inch extended and 15.8 inch collapsed lengths with the front shock being replaced before the Ram 2500 is raised or lowered. Because the body is 2 inches in diameter, check that it clears the front spring and the frame at full compression. The stem top and loop bottom mounts should line up with the factory brackets, and the polyurethane boot should be inspected after installation.
Because the front suspension on a Ram 2500 is heavy duty, check the stem top and the loop lower mount after the first drive. Confirm the 2 inch body clears the front spring at full compression, and check the boot is not twisted when the shock is at full extension.
Confirm the front shock clears the steering linkage and the front bumper brackets on the Ram 2500.
It is sold individually in a silver powder coat finish.
What’s included
One PRO-M front monotube shock with polyurethane boot under part number EXPPR2025.









