Overview
The Pro Comp 927500 is a rear ES9000 Series gas charged shock absorber with loop-style mounts at both ends, sold individually. It fits Chevrolet and GMC C1500, K1500, K2500 and K3500 pickups and Suburbans from 1988 to 1999, along with the 1992 to 1994 Chevrolet Blazer, the 1995 to 1999 Chevrolet Tahoe, the 1992 to 1999 GMC Yukon and V-series trucks from 1988 to 1991.
The shock measures 27.76 inches extended and 16.27 inches collapsed, which gives 11.49 inches of travel. Pro Comp rates it for a 4 to 6 inch lift. Valving is 10 stage and velocity sensitive, and the twin tube body carries a nylon banded piston head and double welded mounts.
Key features
- Rear position for GM full-size trucks and SUVs
- Gas charged twin tube design
- 10 stage velocity sensitive valving
- 1 3/8 inch nylon banded full displacement piston head
- Double welded loop mounts
Older GM truck suspension
Full-size GM trucks and SUVs from the late 1980s and 1990s use rear suspensions where the shock controls the leaf springs and axle movement. On these vehicles the shock is one of several parts that manage rear body motion, so its condition affects ride as much as the springs do. Age also dries out bushings, so replacement often comes after the springs have been checked.
Loop mounts at both ends on a GM rear shock need matching brackets or bushings. Clean the mounting eyes and check for elongated holes or cracks in the axle and frame brackets. If the truck has been raised or fitted with heavier tires, check the lift range against the rear height before ordering to avoid overextension.
When inspecting, look for fluid on the shock body, a knock when the rear moves over bumps, and uneven wear on the rear tires. Worn leaf spring bushings can cause the same symptoms, so inspect them while the shock is off. Tighten hardware to the torque given in the service manual, and recheck it after the first few drives on rough roads.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 927500 |
| UPC | 614901072457 |
| Shock series | ES9000 |
| Position | Rear |
| Extended length | 27.76 in |
| Collapsed length | 16.27 in |
| Travel length | 11.49 in |
| Upper mount | Loop |
| Lower mount | Loop |
| Gas charged or hydraulic | Gas charged |
| Lift range | 4 to 6 in |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
It fits the 1992 to 1994 Chevrolet Blazer, the 1988 to 1998 Chevrolet C1500 and K1500, the 1992 to 1999 Chevrolet C1500 and K1500 Suburbans, the 1990 to 1998 Chevrolet K2500, the 1992 to 1998 K2500 Suburban, the 1988 to 1998 Chevrolet K3500, the 1995 to 1999 Chevrolet Tahoe, the 1989 to 1991 Chevrolet V2500 Suburban, the 1988 to 1998 GMC C1500 and K1500, the 1992 to 1999 GMC Yukon, and the GMC K2500, K3500 and V-series entries covered. Years and body styles vary by entry, so match the exact year and body style before buying.
Entries are split by model and trim, so check the exact year and body style against the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Loop mounts at both ends need matching brackets or bushings. The 4 to 6 inch lift range is the figure to check against your rear height before ordering.
What’s included
One rear shock, sold as each, without a boot.










