Overview
The Pro Comp Pro Runner Monotube Shock Absorber, part number ZX2045, is a rear gas-charged monotube shock for the 2004-2013 Nissan Titan. It suits a 0 – 1.5 in. lift.
Pro Comp says Pro Runner monotube shocks are designed for late model trucks, Jeeps and SUVs, with multi-stage valving tuned to the specific application. The brushed, zinc plated, clear coated shock body is nitrogen gas charged to reduce cavitation during compression and rebound and to help the shock dissipate heat.
Key features
- Gas charged monotube design
- Nitrogen gas charged body helps reduce cavitation during compression and rebound.
- Vehicle specific ride tuning with multi-stage valving
- Zinc finish; boot included
- Loop upper and lower mounts
- Extended 24.85 inch, collapsed 16.85 inch and 8.00 inch of travel
- Sold each; for a 0 – 1.5 in. lift
Off-road use and maintenance
Rear shocks on a truck that sees trails take more abuse from rocks, ruts and washboard, so inspecting the shock after each outing is worthwhile. Check the eye mounts for cracked rubber or bent metal, and look for fresh oil on the body. Loose upper and lower fasteners can make a shock knock or clunk, so tighten them to the specified torque.
Installation work on the rear suspension should leave the brake lines, hoses and wiring clear of the shock through its full travel. Check the vehicle’s alignment after any suspension or steering change. When replacing one rear shock, consider the other side at the same time so both control the axle equally.
- Inspect eye mounts at each tire rotation
- Look for oil on the shock body
- Keep the boot clean and seated
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | EXPZX2045 (ZX2045) |
| UPC | 614901024487 |
| Shock series | Pro Runner Series |
| Position | Rear |
| Type | Gas charged monotube |
| Lift height | With 0 – 1.5 in. lift |
| Extended length | 24.85 inch |
| Collapsed length | 16.85 inch |
| Travel length | 8.00 inch |
| Upper and lower mount | Loop |
| Finish | Zinc |
| Boot included | Yes |
| Adjustable | No |
| Remote reservoir | No |
| Sold as | Each |
| Fitment type | Direct fit |
Vehicle fitment
The manufacturer fitment list for the ZX2045 covers: 2004–2013 Nissan Titan (LE, PRO-4X, S, SE, SL, SV, XE).
The list covers the 2004-2013 Nissan Titan only, and this is a rear shock for a 0 – 1.5 in. lift. It does not cover other Nissan trucks or lifted setups outside that range. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Suspension, steering and brake parts are safety-critical, so professional installation is a good choice. Support the vehicle on rated jack stands, never on a jack alone. Follow the vehicle’s instructions and tighten fasteners to their specified torque. Re-check fasteners after the first miles of driving and after off-road use. Have the alignment checked after any suspension or steering work, and confirm brake lines, hoses and wiring clear the suspension through its travel.
What’s included
One monotube shock with a boot, sold each.
Not included: Check the mounting hardware against your installation before starting.





























