Overview
The Pro Comp Suspension ES3000 324505 is a hydraulic shock absorber for Dodge Ram 1500, 2500 and 3500 pickups. It fits the 1994–2001 Ram 1500 (Base, LT, Laramie, ST and Sport), the 1994–2002 Ram 2500 (Base) and the 1994–2001 Ram 3500 (Base). It is a 24.74 in extended shock with a stem at the top and a loop at the bottom.
The shock collapses to 14.52 in and has 10.18 in of travel. It is non-adjustable and has no remote reservoir. The ES3000 uses a twin tube cellular gas design with 10-stage velocity-sensitive valving, a 5/8 inch chrome-hardened piston rod and a Teflon rebound stop. Double welded mounts and the Pro Comp Suspension limited lifetime warranty complete the package.
Key features
- Twin tube cellular gas design
- 10-stage velocity-sensitive valving
- 5/8 inch chrome-hardened piston rod
- Teflon rebound stop
- Double welded shock mounts
- Stem upper mount and loop lower mount
- White finish, non-adjustable
- Pro Comp Suspension limited lifetime warranty
Stem and loop mounts explained
Stem and loop mounts are two common ways to attach a shock. A stem mount uses a threaded or pinned post through a rubber bushing, while a loop mount is an eye held by a bolt or pin. The two styles locate the shock differently, so a shock built for one will not simply bolt into the other without changing the bracket.
On a pickup that has been driven for many years, the mounting points often show wear. Look for cracked rubber, loose nuts and bent brackets before installing a new unit. Replacing the bushings when the shock comes off is inexpensive insurance, and it keeps the new shock from knocking or wandering at its ends.
- Inspect rubber bushings for splits before reuse
- Check brackets and frame mounts for rust or bending
- Tighten fasteners firmly and recheck after the first drives
- Keep the mount orientation the same as the old shock
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 324505 |
| UPC | 614901695755 |
| Shock series | ES3000 |
| Type | Hydraulic, twin tube cellular gas design |
| Extended length | 24.74 in |
| Collapsed length | 14.52 in |
| Travel length | 10.18 in |
| Upper mount | Stem |
| Lower mount | Loop |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
It fits the 1994–2001 Dodge Ram 1500 (Base, LT, Laramie, ST and Sport), the 1994–2002 Dodge Ram 2500 (Base) and the 1994–2001 Dodge Ram 3500 (Base).
Dodge Ram 1500 models from 2002 and later, and Ram 2500 and 3500 models from 2003 and later, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Ram pickups with a lift should be checked against the shock’s lengths before ordering, since the 24.74 in extended figure is set for this shock alone. Confirm the stem and loop mounts match your truck.
What’s included
One shock absorber, part 324505.
Not included: the dust boot.








