Overview
The Pro Comp Suspension ES3000 321560 is a front hydraulic shock absorber for Land Rover models. It fits the 1993 Land Rover Defender 110, the 1994–1995 and 1997 Land Rover Defender 90, the 1994–1999 Land Rover Discovery, the 2000 Land Rover Discovery Series II, the 1970–1974 and 1987–1994 Land Rover Range Rover, and the 1993 Land Rover Range Rover Sport.
The shock uses factory upper and lower mounts, and it is rated for 0 to 1 in. of lift. Its lengths are vehicle specific. The ES3000 is a twin tube cellular gas design with 10-stage velocity-sensitive valving, a 5/8 inch chrome-hardened piston rod and a Teflon rebound stop, and it carries the Pro Comp Suspension limited lifetime warranty.
Key features
- Twin tube cellular gas design
- 10-stage velocity-sensitive valving
- 5/8 inch chrome-hardened piston rod
- Teflon rebound stop
- Double welded shock mounts
- Factory upper and lower mounts
- Rated for 0 to 1 in. of lift
- Pro Comp Suspension limited lifetime warranty
Land Rover suspension wear
Land Rovers from these years rely on springs and shocks that work together to control body movement off road. Over time, rubber bushings and seals age, and the shock can lose damping. A worn shock may let the body wander over rough ground or produce knocking as the suspension cycles.
Inspect the shock mounts, spring seats and bushings during any suspension work, because wear at either end affects how the shock performs. Check the piston rod for damage after trail use, since grit and debris can scratch it. When one shock is replaced, matching the other shocks on the same axle keeps the vehicle balanced.
- Inspect the piston rod after trail use
- Check bushings at both mount points
- Keep the same axle’s shocks matched
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 321560 |
| UPC | 614901695687 |
| Shock series | ES3000 |
| Position | Front |
| Type | Hydraulic, twin tube cellular gas design |
| Extended, collapsed and travel lengths | Vehicle specific |
| Upper mount | Factory |
| Lower mount | Factory |
| Lift height rating | 0 to 1 in. of lift |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
It fits the 1993 Land Rover Defender 110 (Base), the 1994–1995 and 1997 Land Rover Defender 90 (Base and LE), the 1994–1999 Land Rover Discovery (50th Anniversary Edition, Base, LE, LSE, SD, SE, SE7 and XD), the 2000 Land Rover Discovery Series II, the 1970–1974 and 1987–1994 Land Rover Range Rover (40th Anniversary Edition, Base, County, County LWB, County SE, Great Divide, Hunter and LSE) and the 1993 Land Rover Range Rover Sport. Make sure your year, model and trim match before ordering.
Defender models from 1996 and from 1998 onward, the 2001 and later Discovery, and Range Rover models from 1975 to 1986 and from 1995 onward are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The 0 to 1 in. lift rating suits Land Rovers at or near factory height. Because the mounts are factory, the shock replaces the original at the same points, but compare the vehicle-specific lengths with the old unit before fitting.
What’s included
One shock absorber, part 321560.
Not included: the dust boot.











