Overview
The Pro Comp ES9000 Shock Absorber, part number 929544, is made for use with a 6 inch lift kit. Confirm the rest of its specifications before ordering.
Lift kits and shock length
A lift kit raises the body and changes the distance the shock must cover between its mounts. When ride height rises, a shock sized for the stock height can run out of extension or bottom out early. Before choosing a shock, measure your current one and compare its lengths with the new lift so the travel fits the new geometry.
Lift kits often change the angles at which the shock works, so mount style and bushing condition matter as much as length. Check that the shock clears the frame, axle and brake lines through full travel. Lift and shock changes are usually made together, and the bump stops should be inspected at the same time.
- Measure the old shock before ordering
- Check clearance through full travel
- Inspect bump stops during the install
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 929544 |
| UPC | 614901238327 |
| Shock series | ES9000 |
| Lift use | For use with a 6 in. lift kit |
Vehicle fitment
Fit is not confirmed for this shock, so no vehicle is named here. Because it is intended for a 6 inch lift kit, match your kit’s lift height to the shock’s lengths.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One ES9000 Shock Absorber. Check the package contents against your installation before starting.











