Overview
The Pro Comp 327543 is an ES3000 shock built as a twin tube cellular gas design. It uses 10-stage velocity sensitive valving and a Teflon rebound stop, and Pro Comp backs the ES3000 with a limited lifetime warranty.
It has factory upper and lower mounts, vehicle specific lengths and a direct fit application. It is white, not adjustable and sold as each.
Key features
- Twin tube cellular gas design
- 10-stage velocity sensitive valving
- Teflon rebound stop
- 5/8-inch chrome hardened piston rod
- Double welded shock mounts
Damping and the ride
A twin tube design keeps a reserve of gas and fluid inside the body, which helps the shock keep working through longer or hotter runs. Velocity sensitive valving changes resistance depending on how fast the suspension moves, so small bumps and large hits are handled differently. That difference is useful on a daily driven truck that sees both highway speeds and rough side roads.
Matching a replacement to the existing setup means considering the other suspension parts. Worn bushings, sagging springs or a bent upper mount can make a fresh shock feel wrong, so inspect them when the shock is off. Keep the rebound stop and rod in good condition as well, since a damaged rod can wear seals quickly. Tire pressure and load also affect how the damping feels.
- Inspect the piston rod for pitting or bends
- Check bushings and mounts before fitting
- Replace shocks in pairs on the same axle
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 327543 |
| Series | ES3000 |
| Fitment type | Direct fit |
| Length, extended, collapsed and travel | Vehicle specific |
| Upper and lower mounts | Factory |
| Adjustable | No |
| Finish | White |
The 327543 is a direct fit ES3000 shock built as a replacement rather than a lift product. It uses a twin tube cellular gas design, 10-stage velocity sensitive valving and a Teflon rebound stop, and its piston rod is a 5/8 inch chrome hardened unit. The double welded mounts carry the shock’s load into the truck’s factory hardware.
Because the lengths are vehicle specific, measure the old shock before ordering and compare the mounts at the same time. The shock is white, not adjustable and sold as each.
Vehicle fitment
No vehicle is named for this shock. Match the factory mounts and vehicle specific length to your truck before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One ES3000 shock.










