Overview
The Pro Comp ES3000 Series shock absorber, part number 332543, is a factory-mount shock whose lengths depend on the vehicle. Confirm fit for your vehicle’s year, model and trim before ordering, and check the length on the truck itself.
This is a twin-tube, gas-charged design. The 10-stage velocity-sensitive valving controls damping as the suspension moves, and the 5/8 inch chrome-hardened piston rod carries the load through the seals.
The shock has 10-stage velocity-sensitive valving, which changes damping with the speed of suspension movement. Measure the length on your own vehicle, since the extended, collapsed and travel lengths vary by application.
Key features
- 10-stage velocity-sensitive valving.
- A 5/8 inch chrome-hardened piston rod.
- A Teflon rebound stop.
- Double-welded shock mounts.
- Limited lifetime warranty from Pro Comp.
Checking the original shock
Before removing a shock, measure its eye-to-eye length when compressed and extended, and note where the mounts sit on the axle and frame. Those readings are the simplest way to match a replacement when the length changes from one vehicle to another. Write the figures down so they are easy to compare with the new unit. Compare the stud or bushing style on the old shock too, because a different mount can change how the new shock sits.
A worn shock often shows oil on the body, a bounce that continues after a dip, or uneven tire wear across the tread. Inspect the mounting hardware and bushings while the shock is out, and replace any worn pieces at the same time. Shocks usually work in pairs on an axle, so replacing both sides keeps damping even from one side to the other.
- Measure compressed and extended length before ordering
- Inspect mounting bushings and hardware
- Look for oil seepage along the body
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 332543 |
| UPC | 614901994049 |
| Shock series | ES3000 |
| Extended length | Vehicle specific |
| Collapsed length | Vehicle specific |
| Travel length | Vehicle specific |
| Upper mount | Factory |
| Lower mount | Factory |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Dust boot included | No |
| Sold as | Each |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering, and measure the original shock before buying.
With vehicle-specific lengths, confirm the match on your own truck. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Factory mounts are the reference point for placement. Check full extension and compression against the body and frame once the shock is in.
What’s included
One ES3000 shock absorber.
Not included: a dust boot. Pro Comp lists boot included as No.









