Overview
The Pro Comp ZX4003 is a front Black Series 2.75 coilover shock absorber for the 2009–2014 Ford F-150. It raises the front suspension by up to 2.5 inches, with a lift range of 0 to 2.5 inches. It is designed to complement the Pro Runner Control Arms.
The body is an oversized 2.75 inch zinc plated tube that provides more oil capacity, which helps the coilover run cooler. It is a nitrogen gas charged monotube, and each unit is hand assembled, valved and tuned for the application it is sold for.
The upper and lower mounts use heavy-duty spherical bearings made from a Teflon steel alloy, which Pro Comp says eliminates deflection at the mounting points. The unit is sold individually and carries a clear coated zinc finish.
Key features
- Front position, direct fit
- Raises the front up to 2.5 in
- Oversized 2.75 in zinc plated body for oil capacity
- Heavy-duty spherical bearing upper and lower mounts
- Adjustable, hand assembled and tuned for each application
Coilover setup and ride height
A coilover combines the spring and damper in one assembly, so the spring preload and the damping act together at each front corner. When the unit raises the front, the geometry changes, which can affect steering feel, tire wear and the position of the front axle under load. Checking ride height after the install gives a clear baseline for the rest of the work.
Setting up a coilover is a matter of measuring, then adjusting in small steps. Record the ride height on both sides before and after the install, and confirm the truck sits level front to rear. Fresh front alignment is usually part of the job after any change in height, and the tires should be checked for wear after the first few drives.
- Measure ride height on both sides before and after
- Check that both fronts sit level
- Plan for a front alignment after the change
- Inspect tires for uneven wear after early drives
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | ZX4003 |
| UPC | 614901138771 |
| Shock series | 2.75 Black Series |
| Type | Front coilover |
| Position | Front |
| Lift height | 0 to 2.5 in. |
| Body diameter | 2.75 in |
| Mounts | Heavy-duty Teflon steel alloy spherical bearings |
| Charge | Nitrogen, gas charged |
| Finish | Clear coated zinc |
| Sold as | Individually |
Vehicle fitment
It is a direct fit for the 2009–2014 Ford F-150 in the front position at a 0 to 2.5 inch lift.
The 2004–2008 and 2015 and later F-150 are not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the coilover raises the front by up to 2.5 inches, check the front ride height after installation. The unit is sold individually.
What’s included
One front Black Series 2.75 coilover shock, sold individually.














