Overview
The Pro Comp ES9000 Series front shock absorber, part number 913515, is rated for 0 to 1.5 in. of lift and uses factory upper and lower mounts. It measures 13.96 in. extended and 9.25 in. collapsed, but exact lengths depend on the vehicle, so measure the original shock before ordering.
The design is a twin-tube, gas-charged shock with 10-stage velocity-sensitive valving. The valving gives a smooth, comfortable high ride and supports off-road handling. The piston head is a 1 3/8 nylon-banded full-displacement design, and the shock mounts are double-welded for strength and durability.
Key features
- Twin-tube design with 10-stage velocity-sensitive valving.
- A 1 3/8 nylon-banded full-displacement piston head.
- Double-welded shock mounts.
- Factory upper and lower mounts.
- Gas-charged design rated for a 0 to 1.5 in. lift.
Measuring the original shock
Front shocks carry body weight and control the axle as it moves over bumps, so the new unit has to match the old one in overall length and stroke. Before ordering, measure the eye-to-eye distance of the original shock with the suspension at rest, and note whether its mounts are the same style. A shock that is too long can bind at full droop, while one that is too short can bottom out early.
Lift height changes the geometry as well. A shock rated for a modest lift suits a stock-height or lightly lifted truck, while larger lift angles put more load on the upper mount. Gas-charged twin-tube shocks tend to keep damping steady after repeated hard use, which helps on trails. Inspect the bushings and mounting hardware at the same time, since worn bushings can make a new shock feel loose.
- Measure the old shock eye to eye before removing it
- Check mounting hardware for wear
- Replace shocks in pairs for even handling
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 913515 |
| UPC | 614901070071 |
| Shock series | ES9000 |
| Extended length | Vehicle specific (description gives 13.96 in.) |
| Collapsed length | Vehicle specific (description gives 9.25 in.) |
| Travel length | Vehicle specific |
| Upper mount | Factory |
| Lower mount | Factory |
| Position | Front |
| Lift rating | 0 to 1.5 in. lift |
| Hydraulic / gas charged | Gas charged |
| Adjustable | No |
| Finish | White |
| Dust boot included | No |
| Sold as | Each |
Vehicle fitment
It is a front position shock. Confirm fit for your vehicle’s year, model and trim before ordering, and check the front shock length and mounting style against the one you are replacing.
The two length figures for this part do not agree with each other in the specification table, so confirm the length with Pro Comp for your application. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A front shock works between the axle and the frame. Check the compressed and extended lengths against your suspension travel before fitting the new unit.
What’s included
One ES9000 front shock absorber.
Not included: a dust boot.
























