Overview
The Pro Comp Suspension ES3000 322510 is a front hydraulic shock absorber. It fits the 1978–1996 Ford Bronco, the 1977–1996 Ford F-150 and the 1987–1991 Isuzu Trooper, including several Bronco and F-150 versions and the Trooper’s DLX, LS, RS, S and XS trims. Each shock is sold individually, so each position needs one unit.
It measures 22.75 in extended and 13.54 in collapsed, with 9.21 in of travel. It has a stem at the top and a loop at the bottom. Pro Comp rates it for a 2 to 4 in. lift forward of the axle. The ES3000 is a twin tube cellular gas design with 10-stage velocity-sensitive valving, a 5/8 inch chrome-hardened piston rod and a Teflon rebound stop, and it carries the Pro Comp Suspension limited lifetime warranty.
Key features
- Twin tube cellular gas design
- 10-stage velocity-sensitive valving
- 5/8 inch chrome-hardened piston rod
- Teflon rebound stop
- Double welded shock mounts
- Stem upper mount and loop lower mount
- Rated for 2 to 4 in. lift forward of the axle
- Pro Comp Suspension limited lifetime warranty
Front shock setup and pairs
Front shocks on trucks and sport utilities control the axle as it moves over bumps and under braking. The stem and loop mount style is common on older trucks, and the mounts should be checked for cracks and corrosion before the new shock goes in. A sound mount keeps the shock working along its intended line.
Because this shock is sold individually, plan to replace both fronts together so the damping matches side to side. Look at the old shock’s stem and bushing condition, and check the steering linkage for play. Keep the travel in mind, since a shock near the end of its range can bottom out over large bumps.
- Replace front shocks as a pair
- Check stem and loop mounts for cracks
- Inspect steering linkage for play
- Clean threads before fitting
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 322510 |
| UPC | 614901041675 |
| Shock series | ES3000 |
| Position | Front |
| Type | Hydraulic, twin tube cellular gas design |
| Extended length | 22.75 in |
| Collapsed length | 13.54 in |
| Travel length | 9.21 in |
| Upper mount | Stem |
| Lower mount | Loop |
| Lift height rating | 2 to 4 in. lift forward of axle |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Single shock, sold individually |
Vehicle fitment
It fits the 1978–1996 Ford Bronco (Custom, Eddie Bauer, Northland, Ranger XLT, XL, XLS, XLT, XLT Lariat, XLT Nite and XLT Sport), the 1977–1996 Ford F-150 (Base, Custom, Eddie Bauer, Northland, Ranger, Ranger Lariat, Ranger XLT, Special, XL, XLS, XLT and XLT Lariat) and the 1987–1991 Isuzu Trooper (DLX, LS, RS, S and XS).
Ford F-150 models from 1997 and later, Ford Bronco models from 1997 and later, and Isuzu Trooper models from 1992 and later are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This shock is rated for a 2 to 4 in. lift forward of the axle, so confirm the lift and the forward-of-axle position on your truck before ordering. Measure the shock being removed, since the 22.75 in extended length and 9.21 in of travel are specific to this unit.
What’s included
One shock absorber, part 322510, sold individually.
Not included: the dust boot.












