Overview
The Pro Comp Suspension EXPPR2016 is a PRO-M front monotube shock designed for models with a 2 inch lift. It is sold individually and fits a range of Chevrolet Silverado and GMC Sierra 1500 HD, 2500 and 3500 trucks from 1999 to 2010.
The shock is nitrogen gas charged, and its internal floating piston separates the oil from the gas charge. The shock body holds extra oil to help dissipate heat during off-road use.
Key features
- Front monotube design
- Designed for models with a 2 inch lift
- Nitrogen gas charged with floating piston
- Multi-stage disc pack valving, vehicle specific
- 14 mm chrome hardened shaft
- Polyurethane shock boot included
Front shock replacement
A front monotube shock carries the load of the front end as the suspension moves, so the stem top and loop bottom must match the mounts on the truck. A 2 inch lift changes the shock’s working range, and it is important to confirm that the shock can reach full extension and compression without binding against the spring or frame. Nitrogen gas charged shocks should be kept upright during storage.
Front shocks are usually replaced in pairs to keep the steering feel consistent from side to side. Check the stem bushing or stud for wear, and look at the boot for tears after each season of off-road use. Inspect the lower loop for play, and tighten the mounting hardware after the first few drives. Inspect the stem top for corrosion before reuse.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | EXPPR2016 |
| Shock series | PRO-M |
| Position | Front |
| Extended length | 16.6 in |
| Collapsed length | 11.3 in |
| Upper mount | Stem |
| Lower mount | Loop |
| Finish | Silver powder coat |
Vehicle fitment
It fits the 2001 to 2003 and 2005 to 2006 Silverado 1500 HD, the 2007 Silverado 1500 HD Classic, the 1999 to 2004 Silverado 2500, the 2001 to 2006 Silverado 2500 HD, the 2001 to 2003 and 2005 to 2006 Sierra 1500 HD, the 2007 Sierra 1500 HD Classic, the 1999 to 2000 Sierra 2500, the 2001 to 2006 Sierra 2500 HD, the 2006 Sierra 3500, and the 2007 to 2010 Sierra 3500 HD.
It does not fit 2011 and later trucks or 1500 series trucks outside those years. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The stem top mount needs to match the upper mount on your truck, so check the bushing or stud style before ordering. Compare the 16.6 inch extended and 11.3 inch collapsed lengths with the shock being replaced, since the length determines how much the front ride height changes. With a 2 inch lift, the front suspension geometry may also need checking after installation, and the polyurethane boot should be inspected for clearance at full compression.
The front position on this shock makes it important to check the lower mount against the axle bracket once the truck is at ride height. Confirm the stem top has been seated and the mounting nut is tightened to the shock’s bracket, and that the boot sits on the shaft without pinching.
What’s included
One PRO-M front monotube shock under part number EXPPR2016.









