Overview
The FOX985-02-134 is a front Performance Series 2.0 coil-over IFP shock for the 2019 to 2021 Chevrolet Silverado 1500 and GMC Sierra 1500, and the 2022 Silverado 1500 LTD and Sierra 1500 Limited. It fits Custom, Custom Trail Boss, High Country, LT, LT Trail Boss, LTZ, RST, SSV and WT Silverado trims, and AT4, Base, Denali, Elevation, Pro, SLE and SLT Sierra trims.
The coil-over bolts on with no modifications and is designed to level the truck from front to back. Locking preload rings let the installer set ride height and preload, and the coil is a racing coil selected for its spring rate.
The impact-extruded aluminum body adds cooling capacity and resists rust. The vehicle-specific upper mount uses a composite bushing that isolates noise and vibration.
The internal floating piston separates the shock oil from the nitrogen-charged gas chamber, which stops oil aeration so the factory-tuned valving performs as intended. The design supports a comfortable ride on the road and predictable handling off road.
The body diameter is 2.0 inches, the position is front, and the charge is gas.
Key features
- Front coil-over design that bolts on
- Locking spring preload rings for ride height and preload
- Racing coil spring selected for its spring rate.
- Vehicle-specific upper mount with composite bushing
- Aluminum body for cooling and corrosion resistance.
- IFP design with nitrogen-charged gas chamber
Coil-over setup on 1500 trucks
A coil-over puts the spring and shock together in one unit, which keeps the spring centered and gives an easy point for adjusting ride height. On a 1500 pickup, the front end carries the engine and much of the cargo weight, so the coil rate and preload affect how the truck sits and how it turns. Setting preload evenly on both sides helps the truck stay level and keeps the steering feel consistent.
Front shocks often wear together with the upper mounts and bushings, so inspect those parts when a coil-over goes in. Check for cracked rubber, play at the mount and noises over small bumps. After a height change, have the alignment checked, since camber and toe can shift when the front ride height changes. Tires should be rotated and inspected at the same time.
- Set preload evenly on both sides before the first drive
- Check steering components for play after the install
- Recheck mounting hardware after the first few drives
Specifications
| Brand | FOX |
|---|---|
| Part number | FOX985-02-134 |
| Series | 2.0 Coilover |
| Position | Front |
| Shock type | Coilover |
| Body diameter | 2.0 inches |
| Charge | Gas charged |
| Lift range | 0 to 2 (unit not shown) |
| Adjustment | Locking spring preload rings |
| Upper mount | Vehicle-specific, composite bushing |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2019 to 2021 Chevrolet Silverado 1500 (Custom, Custom Trail Boss, High Country, LT, LT Trail Boss, LTZ, RST, SSV and WT), the 2022 Silverado 1500 LTD (same trims), the 2019 to 2021 GMC Sierra 1500 (AT4, Base, Denali, Elevation, SLE and SLT) and the 2022 Sierra 1500 Limited (AT4, Denali, Elevation, Pro, SLE and SLT).
The list covers 2019 to 2022 1500 trucks only, so 2023 and later models are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Use the locking rings to set ride height, then have the alignment checked afterward. Some applications reuse the stock shock, so confirm which one matches your truck before ordering.
What’s included
One front coil-over IFP shock. Confirm the spring and quantity against your installation before starting.













