Overview
The Pro Comp Suspension 51054BX-1 is a PRO-VST 2.5-inch coilover front shock for the 2019 to 2026 Chevrolet Silverado 1500. The PRO-VST series is Pro Comp’s line for off-road durability, and each shock is tuned to the vehicle it is sold for.
The body is hard-anodized and impact forged with thick walls, which Pro Comp says allows more damping capacity. Its 17-4 PH stainless steel shaft is chrome plated.
Key features
- Hard-anodized, thick wall impact forged body
- Vehicle specific tuning for ride quality on road and performance off road
- 17-4 PH stainless steel shaft, chrome plated
- 2.5-inch body diameter
- Coilover design
Coilover ride height checks
The height of a coilover is set by the spring seat, so changing the seat position or the spring is how ride height gets adjusted. The damper inside handles compression and rebound, and it works best when the spring and damper suit the truck’s weight. Changing front height without also checking the rear can affect how the truck sits and how the steering responds.
Once installed, measure front height at the same points as before and record the figures so future changes are easier to judge. Look at the steering components, tie rod ends and ball joints for play, since a change in front height can load them differently. Keep a note of the spring seat setting and the coilover length as well, which helps if the shock is removed later.
- Record spring seat settings and coilover length
- Measure front height at the same points each time
- Check tie rod ends and ball joints for play
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 51054BX-1 |
| Shock series | PRO-VST |
| Position | Front |
| Shock type | Coilover |
| Body diameter | 2.5 in |
| Shaft | 17-4 PH stainless steel, chrome plated |
| Charge | Gas charged |
Vehicle fitment
It fits the 2019 to 2026 Chevrolet Silverado 1500, the 2019 Silverado 1500 LD and the 2022 Silverado 1500 LTD.
It does not fit 2007 to 2018 Silverado models or the Silverado 2500 HD. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
A coilover changes how the spring and damper load the front of the truck, so compare the installed length with the original shock. This PRO-VST shock is tuned for its vehicle, so use the matching part number for the front position. Confirm your lift height falls within the fitment range before fitting.
Measure the distance between the coilover mounts before and after installation to confirm the front ride height is what you expect. Confirm the shock body clears the tire and the front bumper brackets at full steering lock.
What’s included
One front coilover shock under part number 51054BX-1.
















