Overview
The Pro Comp PR2103 is a PRO-M monotube rear shock absorber for 1969–1987 Chevrolet and GMC pickups, including the K30, V30, C35, K35 and K3500 models. It is designed for trucks with a 6-inch lift and measures 34.8 inches extended and 21.1 inches collapsed.
The shock uses a monotube body with an internal floating piston, which separates the oil from the nitrogen gas charge to limit cavitation. The valving is tuned for the application, and the 2.0-inch body carries extra oil to manage heat when the truck is used off-road for long periods.
The rear shock has loop eyes at both the upper and lower mounts, a 14mm chrome hardened shaft and a silver powder-coated body. Its longer body suits the higher ride height that a 6-inch lift creates, and a polyurethane boot is included.
Key features
- Monotube body with an internal floating piston
- Vehicle-specific multi-stage valving
- 2.0-inch shock body with increased oil capacity
- Redesigned wiper seal
- 14mm chrome hardened shaft
- Silver powder-coated finish
Before you install
A 6 inch lift raises the rear axle and changes the geometry of the suspension, so the shock must reach through a longer working range. Confirm there is room for the full stroke at full droop, including the driveline, brake lines and the rear bumper. A shock that binds can damage mounts or the body.
Heavier trucks put more load through the rear dampers, which makes oil temperature a real concern on long off-road days. Inspect the body for leaking fluid and the boot for tears after each trip. Replacing both rear shocks at the same time keeps the ride consistent from side to side. Tighten fasteners after the first few drives. A new set of mounting bushings can help settle the fit.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | PR2103 |
| Shock series | PRO-M |
| Shock type | Monotube, nitrogen gas charged |
| Position | Rear |
| Extended length | 34.8 in |
| Collapsed length | 21.1 in |
| Shock body diameter | 2.0 in |
| Shaft | 14mm chrome hardened |
| Upper mount | Loop |
| Lower mount | Loop |
| Finish | Silver powder coat |
| Lift height | With a 6-inch lift |
| Boot | Polyurethane, included |
Vehicle fitment
It fits the 1969–1974 and 1977–1986 Chevrolet K30 pickups, the 1987 Chevrolet V30, the 1970 GMC C35 and C3500, the 1977–1978 GMC K35, the 1969–1974 GMC K35 and K3500, and the 1979–1986 GMC K3500, in several trims of each model.
Chevrolet and GMC C10, K10 and K20 pickups from the 1975–1986 range are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
At 34.8 inches extended and 21.1 inches collapsed, this shock needs enough room for its full stroke at a 6-inch lift. Check the mounting positions and the driveline and brake line clearance at full droop before driving the truck.
What’s included
One rear shock with loop eyes at both ends and a polyurethane boot. Check the mounting hardware against your installation before starting.









