Overview
The Power Stop Z36-1119 is a set of front Z36 Truck & Tow brake pads with hardware for the 2006–2010 Hummer H3 and the 2009–2010 Hummer H3T.
Power Stop designed the Z36 line for trucks, 4x4s and SUVs that work hard and play hard, whether the job is towing a boat or trailer, hauling for a jobsite or tackling a trail. Its low-dust ceramic pads are reinforced with carbon fibers, and Power Stop says stainless steel shims help the pads shed heat and brake quietly on long mountain descents.
Key features
- Front brake pads, supplied as a pair
- Carbon and ceramic formula
- Thermal-scorched surface
- Chamfered and slotted like OE
- Powder coated backing plate
- Noise-insulating stainless steel shims
- Hi-temp lubricant included
- Premium stainless steel hardware for a bolt-on installation
Bedding in new pads
New pads need to transfer an even layer of friction material onto the rotor faces before they brake consistently. Start with a series of moderate stops from a moderate speed, allowing the brakes to cool between stops. Avoid holding the pedal down at a stop with hot pads, since that can leave uneven deposits on the rotor surface.
Before bedding in, make sure the caliper slides move freely and the new hardware is seated correctly. Clean any grease from the pad friction surface and check that the lubricant is applied only where the installation calls for it. Once the pads are seated, check for noise or vibration during the first few drives.
- Use moderate stops to bed in pads
- Allow brakes to cool between sets of stops
- Keep lubricant off the friction surface
Specifications
| Brand | Power Stop |
|---|---|
| Part number | Z36-1119 |
| Series | Z36 Extreme Severe Duty Truck & Tow |
| Axle position | Front |
| Fit type | Direct fit |
| Pad formula | Ceramic reinforced with carbon fibers |
| Backing plate | Powder coated |
| Quantity | 1 pair |
Vehicle fitment
It fits two Hummers: the 2006–2010 H3 and the 2009–2010 H3T pickup.
The H3T is listed from 2009, and other Hummer models are not part of this entry. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The pads and hardware arrive together as a bolt-on set, so use the supplied stainless hardware and the hi-temp lubricant instead of reusing worn clips.
What’s included
- Front Z36 ceramic brake pads (1 pair)
- Premium stainless steel hardware
- Hi-temp brake lubricant
Not included: Rotors and rear pads.









