Overview
The Power Stop K211-36 is a Z36 Truck and Tow drilled and slotted brake kit, without calipers, for the 2005-2007 Infiniti QX56, the 2005-2006 Nissan Armada and the 2005-2007 Nissan Titan. The kit includes slotted and cross-drilled rotors and Power Stop Z36 high-friction metallic pads.
The Power Stop K211-36 is a heavy-duty truck brake kit intended for wet, hot and hilly conditions and for towing at max weight. The rotors are coated, and the kit does not include brake lines.
Key features
- Truck and Tow brake kit without calipers
- Slotted and cross-drilled rotors
- Power Stop Z36 high-friction metallic pads
- Rotors coated
- Does not include brake lines
- Intended to improve braking under wet, hot and hilly conditions and when towing at max weight
- Direct fit
Replacing brakes as a set
Brake pads and rotors wear in a pattern tied to their axle, so replacing one side alone can leave uneven braking. Work through the axle as a set and inspect the calipers, hardware and brake lines while the wheels are off. Rust on the caliper slides or a stuck piston can cause one side to drag and overheat a new rotor.
Heavy-duty truck kits are built for towing, hauling and steep grades, which place extra heat in the brakes. Metallic pads grip well at high temperature but can be noisier than ceramic pads, and they can wear rotors faster in stop-and-go traffic. Check the pad material before ordering, and keep fluid fresh so the system responds as expected under load. Allow the new pads a gradual bed-in period before heavy towing.
- Inspect the caliper slides for smooth travel
- Replace brake fluid if it is dark or old
- Check brake lines for cracks or seepage
- Bed in new pads before towing heavy loads
Specifications
| Brand | Power Stop |
|---|---|
| Part number | K211-36 (also PSTK211-36) |
| UPC | 792088566041 |
| Product type | Disc brake pad and rotor kit |
| Kit name | Z36 Truck and Tow |
| Rotor type | Slotted and cross drilled |
| Rotors coated | Yes |
| Pads (short description) | Z36 high-friction metallic |
| Brake lines | Not included |
| Calipers | Not included |
| Position | Axle to confirm before ordering |
| Fit type | Direct fit |
Vehicle fitment
The manufacturer fitment list for the Power Stop K211-36 includes:
- 2005–2007 INFINITI QX56 (Base)
- 2005–2006 Nissan Armada (LE, SE, SE Off-Road)
- 2005–2007 Nissan Titan (LE, SE, XE)
Fit is limited to the years above. Confirm your vehicle’s year, model and trim before ordering, and confirm which axle the kit covers.
Installation notes
Brakes are a safety system, so professional installation is the safer choice. Replace brake parts as complete axle sets, clean and inspect the related hardware, and tighten fasteners to the torque values in your service manual.
Bed in new pads and rotors the way the manufacturer directs, avoid hard stops during the break-in period, and re-check fasteners and braking performance after the first miles of driving. Inspect brake lines, calipers and brake fluid at the same time.
What’s included
- Slotted and cross-drilled brake rotors
- Power Stop Z36 brake pads
Not included: Calipers and brake lines are not included.







