Overview
The Power Stop Rear Brake Kit K2197 (part number K2197) is a rear disc brake pad and rotor kit with drilled and slotted rotors and ceramic brake pads. The kit covers the driver and passenger side rear, and the short list notes “From 10/05”.
The rotors are made from G3000 grade castings with a carbon content 3% higher, and they keep 210 Brinell hardness and 250 MPa tensile strength. The rotors use zinc-dichromate plating for rust resistance. Brake lines are not included.
Key features
- Rear position kit for the driver and passenger side
- Drilled and slotted rotors
- Ceramic brake pads
- Rotors made from G3000 grade castings, with a carbon content that Power Stop says is 3% higher than competitive brands
- Power Stop states 210 Brinell hardness and 250 MPa tensile strength
- Pads that Power Stop says hold a high coefficient of friction above 1000 degrees
- Posi-mold pads hot pressed at over 6,000 psi, asbestos free
- Zinc-dichromate plating for rust resistance.
Choosing rear pads and rotors
The rear axle does less of the braking work than the front, but it still matters for stability, especially when the front brakes are doing most of the stopping. Ceramic pads are a common choice for rear positions because they tend to run quietly and produce a fairly light dust layer. Rotors with slots and drilled faces help move gas, water and debris away from the contact area, which can make the pedal feel more predictable in wet weather.
Before buying rear parts, measure the existing rotor thickness and check the caliper and bracket for corrosion. Rear calipers often include a parking brake mechanism, so confirm that the parts you order match the setup on your vehicle. Replacing rear pads and rotors as a pair keeps the braking balance even on both sides of the axle.
- Measure rotor thickness before ordering
- Inspect rear caliper slide pins for corrosion
- Replace rear pads and rotors as a pair
- Check whether the vehicle uses a parking brake mechanism in the caliper
Specifications
| Brand | Power Stop |
|---|---|
| Part number | K2197 |
| UPC | 792088531896 |
| Product type | Disc brake pad and rotor kit |
| Brake position | Rear, driver and passenger side |
| Rotor type | Slotted and cross drilled |
| Rotor coating | Coated, zinc-dichromate plating |
| Brake pads | Ceramic |
| Rotor castings | G3000 grade |
| Rotor hardness | 210 Brinell |
| Tensile strength | 250 MPa |
| Brake lines | Not included |
| Date note | From 10/05 |
| Fit type | Direct fit |
Vehicle fitment
This kit has no confirmed vehicle fitment. Confirm your vehicle’s year, model, trim and rear brake setup before ordering.
No vehicle fitment is stated, so the kit is not confirmed for any vehicle here. Confirm your vehicle’s year, model, trim and rear brake setup before ordering.
Installation notes
Brake work is safety-critical, so professional installation is the safer choice. Support the vehicle securely on jack stands on level ground, keep brake surfaces free of oil and grease, and torque all fasteners to their specified values. Follow the bedding-in procedure for the pads before normal driving, check the brake fluid level, and test the brakes at low speed before returning to normal driving. Re-check the wheel fasteners after the first miles of driving.
What’s included
Rear drilled and slotted rotors and ceramic brake pads for the driver and passenger side. Check the package contents against your installation before starting.
Not included: Brake lines and brake fluid.









