Overview
The Power Stop K179-26 is a Z26 Street Warrior 1-Click drilled and slotted brake kit for the 2008–2012 INFINITI EX35, the 2013 INFINITI EX37 and the 2014–2017 INFINITI QX50. It is built without calipers.
The Street Warrior is designed for high performance street drivers who want shorter stops, and it suits high horsepower cars and larger wheel upgrades. Confirm which axle the kit is for before ordering, since the name and the position do not agree. A drilled rotor has holes through its friction face and a slotted rotor has grooves cut across it, and the K179-26 uses both. The kit is aimed at street cars rather than truck-and-tow use.
Key features
- Evolution Tru-Cast performance rotors are reverse engineered from OE samples.
- Beveled drill holes, which Power Stop says ensure cooler performance.
- Rounded slots, which Power Stop says keep away gas, water and dust.
- Silver zinc plating resists rust, except on hub and rotor assemblies.
- Z26 pads blend carbon fiber and ceramic and have a higher coefficient of friction than OE.
- Powder coated backing plates resist corrosion, and stainless steel shims insulate noise.
- Chamfered and slotted pads, with thermal scorched surfaces for fast break-in.
- Pads resist fade to 1500 degrees.
Street use and pad break-in
Drilled and slotted rotors suit street driving that involves hard stops, but they work best when the pads and rotors are matched and bedded in. Cold pads may feel grabby until the transfer layer forms, so a set of gentle stops from moderate speed helps the surfaces settle.
Carbon-ceramic pads produce less dust than many street pads, yet they need a warm-up before reaching peak performance. Keep the pad surfaces clean during installation and avoid pumping the pedal when the brakes are cold. On a car that spends much time in traffic, check pad thickness and rotor edges often, since stop-and-go use adds wear.
- Bed in pads on a clear road
- Keep brake dust away from the caliper
- Replace hub and rotor assemblies as a set if a rotor is worn
Specifications
| Brand | Power Stop |
|---|---|
| Part number | K179-26 |
| UPC | 700007468961 |
| Product type | Z26 Street Warrior 1-Click drilled and slotted brake kit without calipers |
| Brake position | Rear in the attribute line; front in the kit name |
| Rotor type | Evolution Tru-Cast, drilled and slotted, silver zinc plated except hub and rotor assemblies |
| Brake pads | Z26 extreme street performance carbon-ceramic pads |
| Pad backing plate | Powder coated |
| Pad shims | Stainless steel |
| Pad fade resistance | 1500 degrees |
| Hardware | Premium stainless steel hardware and pin bushing kit where applicable; Hi-Temp lubricant |
| Fitment type | Direct fit |
Vehicle fitment
It fits three INFINITI entries: the 2008–2012 EX35, the 2013 EX37 and the 2014–2017 QX50, each with Base and Journey trims.
- 2008–2012 INFINITI EX35 (Base, Journey)
- 2013 INFINITI EX37 (Base, Journey)
- 2014–2017 INFINITI QX50 (Base, Journey)
Other INFINITI models and model years outside these ranges are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Pad surfaces are thermal scorched for fast break-in. Hardware and a pin bushing kit are included where applicable, along with Hi-Temp lubricant. The kit has no calipers, so the existing ones are reused.
What’s included
Drilled and slotted Evolution rotors, Z26 carbon-ceramic pads, premium stainless steel hardware and a pin bushing kit where applicable, and Hi-Temp lubricant.
Not included: Calipers.









