Overview
The Power Stop K1782-36 is a front and rear Heavy Duty Truck and Tow brake kit for the 2005–2007 Ford F-250 Super Duty and F-350 Super Duty. It includes slotted and cross-drilled rotors and Z36 high-friction metallic pads for both axles, without calipers.
The Z36 kit is built for wet, hot and hilly conditions and for towing at maximum weight. The rotors are coated, brake lines are not included, and the fitment is direct. Because the K1782-36 combines front and rear sets, it suits owners of these Super Duty trucks who want one part number for all four wheel positions. Slotted rotors have grooves across the friction face, while cross drilled rotors have holes through it.
Key features
- Covers front and rear with one part number.
- Slotted and cross-drilled coated rotors.
- Z36 metallic pads with a high-friction compound.
- It covers 2005–2007 F-250 and F-350 Super Duty.
- Calipers and brake lines are not part of the kit.
Servicing a front and rear set
Replacing both axles at once means the truck has new friction surfaces front and rear, so pedal feel should be consistent after the job. Keep the calipers in good order and check that the slide pins move freely, since a sticking caliper pulls the truck to one side.
Coated rotors protect the surface from light corrosion, but the friction face still needs to be kept clean. Wipe rotors with brake cleaner before fitting, avoid touching the friction face with bare hands, and bed in the pads with moderate stops to transfer an even layer of material.
- Check wheel bearing play on both axles
- Inspect parking brake shoes or rear drums if equipped
- Re-check lug nut torque after the first drives
Specifications
| Brand | Power Stop |
|---|---|
| Part number | K1782-36 |
| UPC | 792088564627 |
| Product type | Heavy duty truck and tow brake kit without calipers |
| Brake position | Front and rear |
| Rotor type | Slotted and cross drilled, coated |
| Brake pads | Z36 high-friction metallic pads |
| Brake lines | Not included |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2005–2007 Ford F-250 Super Duty and the 2005–2007 Ford F-350 Super Duty, in the trims below.
- 2005–2007 Ford F-250 Super Duty (Harley-Davidson Edition, King Ranch, Lariat, XL, XLT)
- 2005–2007 Ford F-350 Super Duty (Harley-Davidson Edition, King Ranch, Lariat, XL, XLT)
Super Duty model years before 2005 or after 2007 are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the K1782-36 is a front and rear kit, both axles are involved, and each axle’s rotors and pads are replaced together. The original calipers and brake lines are reused.
What’s included
The K1782-36 contains slotted and cross-drilled rotors and Z36 high-friction metallic pads for the front and rear axles.
Not included: Calipers and brake lines.









