Overview
The Power Stop K1916 is a front performance brake upgrade kit with silver zinc plated cross-drilled and slotted rotors, Z16 ceramic scorched brake pads and 14mm studs. No vehicle is attached to it, so confirm fit before ordering.
Power Stop says its brake kits include a complete set of cross-drilled and slotted rotors and Evolution ceramic pads. The K1916 covers the front axle, the rotors are coated, brake lines are not included, and the fitment type is direct fit. A cross-drilled rotor has holes through its friction face, and a slotted rotor has grooves across it, and the K1916 uses both. Few Power Stop descriptions give a stud size, so the 14mm figure is a useful detail for the K1916, although no vehicle is named. Treat the kit as a part to verify with the manufacturer rather than a confirmed match for a particular vehicle.
Key features
- Front-axle kit with silver zinc plated rotors.
- Cross-drilled and slotted rotor pattern.
- Z16 ceramic scorched brake pads.
- The kit includes 14mm studs.
- Power Stop gives the fitment type as direct fit.
- Brake lines are excluded.
Stud size and front axle work
Front brakes take the larger share of stopping force on most vehicles, so front pad and rotor wear tends to show up first. Keeping the front axle matched, with pads and rotors replaced together, avoids uneven contact on the new surface. A stud that does not match can change wheel seating, so the hardware should be checked before any work starts.
Cross-drilled and slotted rotors look aggressive but do their main job by venting heat and clearing debris. Ceramic pads keep dust lower and bite smoothly once warm, though they are less grabby in very cold weather. Silver zinc plating helps the rotor resist corrosion between uses.
Inspect the front calipers, slide pins and dust boots at the same time. Dry or seized slides cause one side to wear faster and pull under braking. Clean the hub face and lug studs before fitting the new rotor so it sits flat.
- Confirm stud size before buying
- Clean the hub face before fitting
- Check front caliper slide movement
Specifications
| Brand | Power Stop |
|---|---|
| Part number | K1916 |
| UPC | 792088529756 |
| Product type | Performance brake upgrade kit |
| Brake position | Front |
| Rotor type | Slotted and cross drilled, silver zinc plated, coated |
| Brake pads | Z16 ceramic scorched brake pads |
| Studs | 14mm |
| Brake lines | Not included |
| Fitment type | Direct fit |
Vehicle fitment
No make, model or year is tied to the K1916. Compare its 14mm studs with your vehicle’s studs and confirm year, model and trim before ordering.
No vehicles are named, so none can be ruled in or out. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The K1916 covers the front axle only, and its 14mm studs should be compared with the studs on the vehicle. Replace front rotors and pads together and reuse the brake lines already fitted.
What’s included
The K1916 contains silver zinc plated cross-drilled and slotted rotors with 14mm studs and Z16 ceramic scorched brake pads for the front axle.
Not included: Brake lines.








