Overview
The Mountain Off Road Enterprises 98600 is an install kit for fitting a Ford 8.8 axle in a 1984-01 Jeep Cherokee XJ.
It includes two weld-on anti-wrap style spring mounts for the housing, four U-bolts, two U-bolt plates and two weld-on shock mounts. All hardware is unpainted, and the kit is for the rear axle location.
Key features
- Anti-wrap style spring mounts for the axle housing
- Two weld-on shock mounts
- Four U-bolts with two U-bolt plates
- Unpainted hardware
Welding and protecting the kit
Weld-on suspension mounts bring a few practical demands. The welding must be done on clean metal, with the surfaces free of paint, rust and grease, and the frame and housing should be prepared before the mounts are set. Because the hardware is unpainted, it will rust in time without a coating, so a protective finish is part of the job.
Plan the order of work before welding. Fit the mounts, check alignment of the axle and springs, and only then weld the parts in place. Use a coating that suits the metal and the welds, such as a primer and paint or a rust-resistant finish. Recheck the U-bolts and plates after the first drives, since fresh mounts can settle as the axle and springs take load.
Specifications
| Brand | Mountain Off Road Enterprises |
|---|---|
| Part number | 98600 |
| UPC | 70000361086 |
| Axle | Ford 8.8 |
| Axle location | Rear |
| Spring mounts | 2, anti-wrap style, weld-on |
| Shock mounts | 2, weld-on |
| U-bolts | 4 |
| U-bolt plates | 2 |
| Hardware finish | Unpainted |
Vehicle fitment
The kit is for installing a Ford 8.8 axle in a Jeep Cherokee XJ from 1984 to 2001.
The kit is not for the Grand Cherokee (ZJ or WJ) or the Liberty (KJ). Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The spring mounts and shock mounts are weld-on items, so they must be welded to the housing and frame. A qualified welder should handle this work. Because the hardware is unpainted, plan a protective coating after fitting.
What’s included
Two weld-on anti-wrap style spring mounts for the housing, four U-bolts, two U-bolt plates and two weld-on shock mounts, all unpainted.
Not included: The Ford 8.8 axle, springs and shocks must be sourced separately.




