Overview
The Method Race Wheels MR312 is a 17 inch by 8.5 inch aluminum split spoke wheel with a 6 on 120 bolt pattern, part number MRWMR31278562900, in Method Bronze/Black. It is built for daily driving and weekend trail use, and it is Universal Fit, pointing toward most trucks, Jeeps and SUVs rather than one model.
The MR312 is modeled after the 106 Beadlock wheel. Its face is a concave split-six spoke design with a small debossed Method mark on one spoke, and it uses the v.3 Stree-Loc ring. The bolt pattern, offset, center bore and backspacing are the measurements to match before mounting.
Key features
- Concave split-six spoke face with a debossed Method mark on one spoke
- Newer v.3 Stree-Loc ring design
- Lip bolts are stainless steel, removable and shear protected
- Aluminum construction in a 17 by 8.5 inch size
- Bronze tone finish in Method Bronze/Black
- Bolt-on center cap and its hardware come with the wheel
Street and trail tire choices
The wheel’s width and offset shape which tire will fit well. A tire that is too wide for the wheel can bulge and wear unevenly, while a narrow tire on a wide wheel changes the sidewall profile. Choose tires with a load rating and tread that suit how the vehicle is driven.
Trail use asks more of the bead, lip and sidewall than paved driving. Lower tire pressures improve grip on rock and sand, but they also raise the risk of a bead coming off the rim, so set pressures with the tire’s rating and the terrain in mind. Balance the wheel and tire assembly after mounting.
- Match tire width to wheel width
- Check the tire’s load rating
- Balance each wheel and tire assembly
- Recheck pressures after trail runs
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR31278562900 |
| Series | MR312 |
| Wheel diameter | 17 inches |
| Wheel width | 8.5 inches |
| Bolt pattern | 6 on 120 |
| Center bore | 67 |
| Offset | 0 |
| Backspacing | 4.75 |
| Style | Split Spoke |
| Finish | Method Bronze/Black |
| Construction | Aluminum |
Vehicle fitment
No single year, make or model is tied to this wheel, since it is Universal Fit. Match the 6 on 120 bolt pattern, 0 offset and 4.75 backspacing to your vehicle’s hub and clearance figures before choosing it.
Universal Fit does not confirm clearance for any single model, so verify tire and brake clearance yourself. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Offset is the distance from the mounting face to the wheel centerline, so a 0 offset places the mounting face at center. Center bore is the opening that sits over the hub, and 67 is the figure to compare with yours. Fit the bolt-on center cap using its included hardware. With a 0 offset and 4.75 backspacing, check suspension and caliper clearance once the tire is mounted.
What’s included
A bolt-on cap with its hardware comes with the package. Source tires and lug nuts separately.










