Overview
This bronze 17×7.5 wheel has part number MRWMR70177556950 and a 5 on 160 bolt pattern. It is aimed at off-road trail and racing use, and it is Universal Fit, so no vehicle is named.
The wheel is one-piece cast from 356 aluminum, then T6 heat treated. Bead Grip technology is patent pending and works with the tire bead seat for added grip at reduced air pressures. A reinforced inner lip uses race wheel design, and field testing and Finite Element Analysis were part of development.
The 65 center bore, 50 offset and 6.2 backspacing define how the wheel seats on the hub and where it sits in the wheel opening. Those three figures are the first things to check before you commit.
Key features
- Bead Grip technology that works with the tire bead seat at lower air pressures
- Reinforced inner lip based on race wheel design
- Safety humps on the inner and outer bead seats that help stabilize the tire
- Cast 356 aluminum with T6 heat treatment
- Windowed style with a bronze finish and 17 inch by 7.5 inch size
Hardware and mounting prep
Mounting hardware should match the wheel’s seat type and thread size. Lug nuts for steel or aluminum wheels differ in seat shape, and using the wrong seat can loosen the wheel over time. Check the hardware against the wheel before you start mounting.
Hub-centric rings can center a wheel on a hub when the center bore is larger than the hub. Use the correct ring size and avoid stacking rings. Spacers change the wheel’s position and should be checked against brake and suspension clearance.
After the first few drives, re-torque the lug nuts and inspect the wheel for cracks, bent lips and bead damage. Keep a log of torque checks so you know when the last inspection happened. Bronze finishes can scuff, so use a soft cloth and mild soap for cleaning.
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR70177556950 |
| Series | MR701 Bead Grip |
| Style | Windowed |
| Finish | Bronze |
| Construction | Aluminum |
| Wheel diameter | 17 Inches |
| Wheel width | 7.5 Inches |
| Bolt pattern | 5 on 160 |
| Center bore | 65 |
| Offset | 50 |
| Backspacing | 6.2 |
| Fitment | Universal Fit |
Vehicle fitment
Method lists Universal Fit, which means the wheel is not tied to a particular year, make, model or trim. The 5 on 160 bolt pattern and 65 center bore need to match your hub, and the 50 offset with 6.2 backspacing should clear brakes and suspension.
Compare the listed measurements against your vehicle before ordering. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm the 5 on 160 bolt pattern and 65 center bore against your hub before mounting. Check that the 50 offset and 6.2 backspacing leave enough room for brake calipers.
What’s included
The wheel is the only item covered here, so verify lug nuts, center caps and tires before mounting.
















