Overview
The Method Race Wheels 704 Trail Series 16×8 wheel in Matte Black, part number MRWMR70468060500, is a one-piece cast aluminum off-road wheel with a 6 on 5.5 bolt pattern and a 106 center bore. It is designed for trail and off-road tires that run at lower air pressures, and its MR704 Bead Grip design is meant to help the tire bead stay engaged with the wheel.
The 704 is a windowed wheel with a reinforced inner lip carried over from race wheel design. Raised safety humps on the inner and outer bead seats help hold the tire and resist de-beading. Each design went through Finite Element Analysis and field testing with off-road drivers in mind.
Key features
- Bead Grip technology engages the tire bead seat for added grip at lower air pressures
- Reinforced inner lip taken from race wheel design
- Safety hump on both bead seats to help prevent de-beading
- One-piece cast 356 aluminum with T6 heat treatment
- Windowed 16 inch by 8 inch design in Matte Black
- The wheel is engineered to weigh less while adding strength.
- Finite element analysis and field testing were used in development.
Bead Grip at lower pressures
Bead Grip is meant to hold the tire bead on its seat when pressures run low, a common setup on trails where the tire can lose its grip on the rim. The reinforced inner lip and safety humps on each bead seat add to that hold. Under load, the tire still needs a clean, seated bead, so check the seat before each trip and after any air-down.
Hub fit and tire choice come next. A bore larger than the hub may need a hub-centric ring so the wheel centers on the hub, not on the lug studs. Pick a tire sized to the wheel width and confirm sidewall clearance at full steering lock. Once the bead is seated, drop to trail pressure in small steps.
- Seat the bead fully before lowering pressure
- Check the bead after every air-down
- Use a hub-centric ring if the bore is larger than the hub
- Keep tire sidewall clearance at full lock in mind
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR70468060500 |
| Series | MR704 Bead Grip, Trail Series |
| Diameter | 16 inches |
| Width | 8 inches |
| Bolt pattern | 6 on 5.5 |
| Center bore | 106 |
| Offset | 0 |
| Backspacing | 4.5 |
| Style | Windowed |
| Finish | Matte Black |
| Construction | One-piece cast 356 aluminum, T6 heat treatment |
| Fitment category | Universal Fit |
Vehicle fitment
Method categorizes this wheel as universal fit, so no single make, model or year is named. The 6 on 5.5 bolt pattern, 106 center bore, 0 offset and 4.5 backspacing must still match your hub and brake clearance before you mount it.
Universal fit is a category label, not a confirmed match for any one vehicle. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm the 106 center bore against the hub; a larger bore may need a hub-centric ring. Inflate the tire to the bead seating pressure its sidewall calls for, then lower to trail pressure.














