Overview
The Method Race Wheels Con 6 MR310 measures 17×8.5 inches with a 6 on 5.5 bolt pattern and a bronze/black finish. It is part MRWMR31078560900, a spoke wheel made from aluminum. It has an offset of 0, a 106 center bore and 4.75 backspacing. No vehicle is tied to it, so the bolt pattern and bore decide fit.
The Con 6 is part of the MR310 line, built for off-road racing use. Each design goes through Finite Element Analysis and field testing to reduce weight while adding strength. Street versions also come in Diamond Cut / Clear or Matte Black, while this part is bronze/black.
Key features
- Spoke styling from the Con 6 MR310 range
- Bronze/black color
- Aluminum construction
- Bolt pattern 6 on 5.5 with a 106 center bore
- Offset 0 and backspacing 4.75
- Method reports its wheel design was refined through Finite Element Analysis and field tests
Wheel care and inspection
Spoke wheels with a shallow mounting face can rub on calipers or control arms when tire size changes, so check how a larger or wider tire will sit against the fender and suspension before committing to a setup. Aluminum wheels are sensitive to curb strikes and pothole impacts, which can bend the bead seat or crack the spoke area even when the damage is hard to see.
After mounting, re-check the lug nuts after the first short drive, because aluminum can settle against the hub. Clean the hub face and the wheel seat before installation, and keep the valve stem tight and free of debris so the tire holds air.
- Look for cracks around the spokes after rough trails
- Inspect the bead seat after any tire change
- Check tire balance if vibration appears at speed
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR31078560900 |
| Series | MR310 Con 6 |
| Wheel diameter | 17 inches |
| Wheel width | 8.5 inches |
| Bolt pattern | 6 on 5.5 |
| Offset | 0 |
| Center bore | 106 |
| Backspacing | 4.75 |
| Style | Spoke |
| Finish | Bronze/Black |
| Construction | Aluminum |
| Fitment field | Universal Fit |
Vehicle fitment
This wheel is a universal fit, so it is not tied to one vehicle. Match the 6 on 5.5 bolt pattern, 106 center bore, 0 offset and 17 by 8.5 inch size to your hub and clearance. Confirm fit for your vehicle’s year, model and trim before ordering, then measure brake and suspension clearance before mounting.
A hub with 6 on 135 studs or different spacing will not take this wheel. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The 106 center bore needs to suit your hub so the wheel centers and runs true. The 0 offset and 4.75 backspacing place the mounting face at the wheel’s centerline, which affects brake and suspension clearance, so measure before mounting.
What’s included
The wheel only, with no tires, caps or hardware included.
Not included: Tires and wheel hardware are separate parts.









